2Nd Shift Quality Technician Jobs in Clay, Texas

Perform data entry and operate the computer programs associated with component production, labeling, storage, and sample tube management.

Perform good inventory management practices throughout the manufacturing process.

Analyze and make decisions based on visual inspection and information provided from other departments to meet time requirements and quality standards.

Identify and quarantine products/samples that don’t meet quality requirements. Perform disposition of unacceptable products/samples.

Good communication skills, with the ability to work on a team, as well as independently with minimal supervision

Manufacture, label, test, sample, and store blood products/samples according to applicable policies and procedures.

High School diploma/GED with zero to one year related experience or equivalent combination of education and experience

Performs documentation reviews for compliance with stated requirements, including vendor quality manuals and company quality records.

Ability and desire to use all inspection and computer equipment supporting described job responsibilities

Ability to interpret engineering requirements produced and used in the normal course of hydraulic cylinder manufacturing

Find any required PO #’s

Reclassify any parts that don’t match the supplier part # so that material can be adjusted out properly

The required qualifications desired in terms of education, course concentration, work experience, technical knowledge and desired advanced certifications

The preferred qualifications desired in terms of education, course concentration, work experience, technical knowledge and desired advanced certifications.

Learn and support of the quality management system

Specific Job Knowledge, Skill and Ability

Mechanical ability and fine motor skills

A satisfactory 90 day review is on file, successfully meeting the requirements of the Lab Apprentice position

Two to three years job related experience in commercial industry

Equal Opportunity Employer-Minorities/Females/Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity.

Associates Degree (Technical Diploma) or 2 years college course work in the HVAC field

State of Georgia HVAC License

Preferred Knowledge, Skills and Abilities:

Knowledge and experience with FDA and ISO Quality Systems to include SPC and calibrations systems.

Education: High School or equivalent

Experience: Less than 3 years of experience.

Proficiency with PC and Microsoft Office; Knowledge of QMS Master Control, MeasureLink and other Quality systems is preferred.

Experience with ISO 9000 standards and GMP’s

One year of experience working with machinery in a manufacturing environment

Experience operating packaging equipment such as robotics, filling machines, case packers, labelers, etc.

Experience monitoring the quality of raw materials or finished goods

Review labels, containers and packaging items to assure correct items and information is used.

Operate equipment for packaging, stacking, conveying and wrapping.

Use vacuum hoist lift assist.

Excellent attention to detail and organizational skills

Strong written and oral communication skills

Enthusiastic, aggressive, self-starter with strong people skills

Experience working with rectifiers and controllers circuitry.

Experience with using schematics and drawing to troubleshoot electronic circuits

Ability to work long periods while standing, bending, and walking

2 years of automation experience

Experience with material handling, automation and robotics equipment

Basic understanding of PLC’s (no programming experience required)

Experience with dispense systems a plus

Maintain continuous system operation by adjusting, repairing, or replacing automation/robotic system components

Identify machine malfunctions and isolate the failure mechanism

2+ years of assembly or manufacturing experience

Knowledge of electrical theory and/or electrical assembly is a plus, but we can teach this

Have always enjoyed working for CP USA. This is truly the best working environment I’ve ever worked in.

This is a great company to work for and the employee longevity shows it.

100% employer paid medical, dental and vision insurance

Assembling parts and components using hand and power tools.

Prepare and handle raw materials and finished goods in compliance with quality standards and requirements.

Bachelor’s degree in physical science and/or food industry experience preferred

1-3 year of general work experience required.

Prior food production operation experience preferred.

Previous experience within high-speed industrial environment preferred.

Ability to read and understand MSDS, operate manufacturing equipment, and knowledge of industrial technology a plus.

Regularly reports out quality performance to peers and management team.

3+ years of supervision experience. Or a combination of education and experience

Maintains a high-quality relationship with the internal shop production managers and group leaders.

Skilled at data driven problem solving of issues identified in process and products.

5+ years of manufacturing or mechanical experience.

Metal stamping and weld experience

Typically requires 5 years of related experience and/or trade knowledge

Performs calibrations and re-qualifications on equipment at specified intervals and schedules.

Requires an Associate’s Degree in related field, military technical training, or equivalent education and training

Advanced technical skills used to conduct on the job training and/or guide other employees

Demonstrates broad knowledge of functional techniques and has input to process improvement

Full range of medical benefits, dental, vision

Strong time management and organizational skills with the ability to multi-task and manage multiple projects independently

Assist in the review of QC data and provide summaries to management as needed

Assist QC Management, as needed, in the completion of OOS, deviations, and CAPAs investigations for QC

Minimum 3-5 years’ experience in pharmaceutical industry environment or equivalent combination of education and experience

Perform or assist with QC method qualifications, transfers and validations

Experience working in cGMP or GLP pharmaceutical industry environment

Compiles logbooks and test procedures documentation utilizing good writing skills. Assists in revising, developing and implementing department procedures.

Uses communication skills to regularly exchange information

Works from schematics, diagrams, written and verbal descriptions, layouts or plans to perform moderate testing and troubleshooting.

May perform mechanical, electrical, pneumatic & vacuum and process testing on AMAT platforms to Engineering and Manufacturing documentation and specifications.

Performs necessary rework and assists in determining remedies for malfunctions and generates Quality Notifications.

Has developed proficiency in a range of analytical processes or procedures to carry out assigned tasks

Computer skills including Word, Excel, and Internet experience.

Utilizes Visual Inspection Systems and other inspection tools (tensile strength machines/calipers/pin gages/etc.) per inspection requirements.

Previous minimum 4 years QA/QC experience with medical device manufacturer.

Experience in regulated environment (e.g. FDA QSR, ISO 13485, etc.).

Coordinates and delegates daily priorities to ensure accurate and timely completion.

Maintains accurate records for compliance with regulation.

Follow established programs, policies and practices to produce safe, quality foods that meet regulatory and company requirements.

Basic math and computer skills

Strong oral and written communication skills

Minimum of two years previous quality assurance lab experience

Knowledge of food safety programs, microbiological and sanitation concepts

Functional knowledge and use of Microsoft Office

Communicate all critical issues and problems concerning QA, test equipment problems, schedule changes, and assignments to the plant manager

Volunteer to help where needed to get the job done and enhance skills

Ability to read and comprehend work instructions. Written communication and math skills are necessary to perform duties

Solid and fluent working knowledge of Microsoft Office suite of programs

Experience in a controlled lab environment

Works with some direction and supervision of the Plant Manager to include the following:

Clean optic surfaces utilizing a variety of chemical and mechanical means.

Inspect optics to assure complete removal of all surface residue and particulates.

Utilizing scratch and dig standards and designated reticles, assure no rejectable physical damage is present.

Load clean and inspected optics into designated tooling or fixtures in preparation for coating.

Unload coated optics and re-inspect for coating quality and to assure that no physical damage has occurred.

Prevents or corrects deficiencies in surface quality and workmanship.

Follows instructions, responds to management direction; Keeps commitments; Completes tasks on time or notifies appropriate person with an alternate plan. Initiative

Asks for and offers help when needed. Innovation

Collects and researches data. Design

Generates creative solutions; Demonstrates attention to detail. Problem Solving

Identifies and resolves problems in a timely manner; Develops alternative solutions; Works well in group problem solving situations. Oral Communication

Speaks clearly and persuasively in positive or negative situations; listens and gets clarification. Team Work

Conduct validation testing versus declared Certificate of Analysis results of incoming ingredients. Maintain and update records of all testing.

Complete verifications for production equipment such as in-line check weighers and metal detectors.

Assist in production associate training, communication, and executional activities.

Proficiency in MS Word and MS Excel.

Quality Assurance Technician – 2nd shift

Test products for production, conformance, qualification, and evaluation.

Experience in electronics and test equipment operation is beneficial.

Support multiple simultaneous product tests.

Setup and operate environmental, vibration, and electronic test equipment.

Setup and perform immersion, chemical, salt fog, and solar radiation testing.

Record and compile environmental test data.

Associates degree in a technical field with quality or manufacturing experience may be considered.

Strong knowledge of manufacturing processes including business acumen and understanding assembly operations.

Provide support to operation team when quality issues arise to maintain production.

Lead problem solving to improve quality, safety and Takt attainment.

Partner with Product Engineering, Manufacturing Engineering and Operations to ensure that quality plans are established, followed, and that processes are capable.

Collect and communicate quality metrics, and communication of quality issues.

Support the Value Stream and Quality Manager with Key Process Quality measures on a daily, weekly, and monthly basis;

Demonstrate advanced measurement and inspection skills, including programming, troubleshooting, and application of assembly fixtures and measurement equipment;

Adhere to work standardization and associated training requirements

Complete quality requests to support the New Model Introduction teams with part measurements and analysis;

Perform First Article Inspections and Design Capability Studies as required;

Complete measurement equipment verifications, as required;

Demonstrated and documented mechanical knowledge, either personal or professional experience

Benefits Day 1 - Total Rewards: Health, Dental, 401K w/ match, HSA/FSA, RX, additional wellness

Relevant experiences must be described in application to be considered

Experience using mechanical tools including torque tools

Applications must be complete to be considered. Please include an attached resume or manually entered experience.

13 Days' Vacation first year

Demonstrates good perception, judgment, and decision making skills.

Electronic Technicians can make $32.72 to $39.96 an hour depending on experience

Exercises personal safety on the job and demonstrates a commitment to the safety of others and our products.

Possess above average mechanical, electrical and electronic aptitude.

Be self-directed, self-motivated, industrious, creative, and have the desire to help others excel.

Ability to read electrical prints, ladder diagrams, and electronic schematics.

Monitor and record test related documentation to meet quality requirements

Train and certify others to the duties and responsibilities as required

Technical Associate Degree or equivalent experience in a manufacturing environment

At least 2 years of experience with Electronics

Experience working in a highly regulated environment

Proficiency in a wide range of mechanical fabrication skills

1+ years of experience preferred; experience with quality inspection in a manufacturing/production environment preferred

Teammates: Partners who listen to ideas, share thoughts and work together to move the business forward

Self-starters: People who thrive in an autonomous work atmosphere. Go getter mentality

Initiate correction request for discrepancies pertaining to DHR records, Times, Temperatures, documentation error, Quantity, etc.

Maintain spreadsheets for track and trend analysis (Samples, GDP, inspections, findings, etc.) Prepares basic/simple technical reports.

Maintain Good Record- keeping practices.

5+ years supervisory experience in manufacturing environment with demonstrated leadership abilities

We offer a comprehensive and competitive total compensation package which includes health benefits coverage on

Health benefits start on day one

Requires solid understanding and experience with concepts associated with Kaizen and Lean principles

Must possess strong verbal, written and interpersonal communication skills

We offer a comprehensive and competitive total compensation package which includes:

Adheres to all Environmental Management Systems/ISO 14001 practices and procedures.

Operation, testing, troubleshooting and repair of all rack-mounted, stand-alone gas refrigerant HVAC units.

Perform refrigeration, HVAC, boiler and hot water system PM’s.

Maintains the material integrity of the engine and utility rooms in accordance with established best practices.

Rebuilds ammonia, HVAC, boiler and hot water system components in accordance with technical manuals.

Adheres to all Company policies including but not limited to: safety, Good Manufacturing Practices (GMP’s) and Standard Operating Procedures (SOP’s).

Perform data entry and analysis as required to maintain production logs or other data capture tools.

Document process deviations in EtQ system and report to the Quality Control Manager.

Must meet/comply with all safety requirements, attend required training and wear personal protective equipment where required.

Education: College/University (Bachelors or Equivalent); Chemistry, Chemical Engineering , Food Science or related science

Experience: Minimum of 2 years experience

Demonstrated written and oral communication skills

Knowledgeable of local, state, and federal guidelines and regulations to safely rig and move objects.

Effective verbal and written communicate skills.

Analytical and problem solving skills.

Ability to hold necessary physical certifications.

Requires the ability to interact effectively with co-workers and managers.

Ability to obtain certifications required to perform tasks assigned.

Essential Knowledge, Skills & Abilities:

Ability to speak effectively before groups of customers or employees of organization at all levels, including janitorial, management, and executives

Language Skills, fluent in English

Specific Job Duties and Tasks:

Place finished product on "HOLD" status when results fall outside of acceptable range, investigate potential causes, and propose solutions.

Assist in disposition of hold products through retest or providing sorting instructions to production.

Responsible for following all ISO 9001/22000 standards for the site to ensure that certification is maintained

Ensures compliance with regulatory requirements

College Degree or a minimum of 3 years applicable production/quality experience within the last 10 years in a food/beverage manufacturing site

Experience in the ISO 9001/22000 standard

Good communication skills including presentations, negotiations, meeting facilitation and producing written documents

Excellent working knowledge of the TTB regulations

Minimum two year of experience in a similar role in manufacturing or automated distribution facility

Intermediate Mechanical (including Hydraulics and Pneumatics), Electrical, and Computer Skills

Experience/Ability to work with CMMS

Detail oriented with strong organizational and prioritization skills

Setup the use of tools and equipment prior to production for optimum safety levels

Intermediate troubleshooting, maintain, and repair automated mailing equipment

High School degree (or equivalent) and 3 years of related work experience OR associate degree in a related field

Knowledge of Microsoft Office tools (Excel, Word, PowerPoint, and Outlook) to be able to create reports and send/receive emails.

Quality assurance and audit experience is a plus

Excellent written and verbal communication skills

Perform detailed inspection of all parts and / or assemblies.

Ensure that all engineering drawings provided match the product inspection.

0-4+ years related experience or equivalent combination of education and experience.

Using the company operating system to generate inquiries, perform movement of material, and any other function required to perform job duties.

Comfortable with basic computer skills, including Microsoft Office.

Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

Efficient/effective planning and performance of routine and non-routine mechanical inspection using pre-determined methods for product acceptability.

Using corrective action system and subsequent follow up process to resolve deficiencies found during job function.