Register
Recruit Create CV

Fabrication Grinder Jobs in Erath, Texas

Fabrication Technician Ii Jobs
By YKK AP America Inc. At , Dublin, 31021, Ga
Fabricates, assembles and understands quality requirements for each process of cut, prep, assembly .and glaze.
Experience working with hand tools preferred
Must have good communication and organizational skills.
Essential Functions and Key Responsibilities
Comprehends and completes fabrication and assembly on a sequence of operations concerning each window system.
Identifies and tags material with written symbol for assembly and inspection
Grinder Technician Jobs
By Röchling Industrial At Duncan, SC, United States
Knowledge of customer specific requirements (CSR) necessary through advanced training, or work experience or a combination of the two.
Inventory / control of scrap and ground materials
Perform material changeovers of grinding equipment
Performing material changeovers of blending equipment
Loading and recording of scrap that goes on trucks to be sold
Fill out bill of ladings for truck drivers
Grinder/ Parts Cleaner Jobs
By Onin Staffing At Abernathy, TX, United States
Set up tools and machinery for the project
Grind and smooth rough areas of each piece
Inspect finished pieces for quality control
Follow all safety procedures and company policies
Grinder Jobs
By J.C. Steele & Sons At , Statesville, 28677 $24.67 an hour

Manual Machinist Pay Range: $24.67 Maximum Rate (plus seniority raises) Job Summary: Hourly Non-exempt Position This position is responsible for setup and operating manual lathes and ...

Fabrication Technician Jobs
By Lockheed Martin At , Fort Worth, 76108, Tx

Other Important Information You Should Know

Fabrication Jobs
By Lippert At , Beeville, 78102, Tx
Comprehensive benefit offerings including medical, dental, vision, 401k with employer match, vacation, and more!
No experience or education required.
Reports defective materials or questionable conditions to the shift leader or production manager
Previous experience in a manufacturing setting preferred, but not required
Previous experience with machinery, basic machine set up, and small power tools preferred, but not required
Opportunity to earn a monthly Bonus
Fabrication Specialist Jobs
By Practical Imagination At Central, FL, United States

Themed attraction fabrication specialist

Grinder Jobs
By Meissner Filtration Products At , Camarillo, 93012, Ca
The skills and experience you’ll need:
High school diploma and 2-5 years’ experience as a grinder or similar job required.
Strong verbal and written communication skills and ability to read schematics and/or blueprints.
Experience with Hand and Power tools preferred.
Don’t meet every single requirement? Apply anyway.
Sets up and adjusts grinding equipment for various lengths and diameters.
[Dal] Grinder/Polisher Jobs
By Regal Staffing Services At Plano, TX, United States
Experience in using electrical or manual tools (saws, squares, caliper)
Finish or polish metal parts using a variety of stationary and portable grinders, files, buffing wheels, and sanders
Ensure work is done safely and meets quality standards
Assemble items as instructed by department supervisor
Keep work area clean and organized and take proper care of all equipment and facilities by 5S
Follow all company rules and policies
Centerless Grinder - Cherry
By Precision Castparts Corp. At , Santa Ana, 92705, Ca $17.75 - $26.50 an hour
Set up centerless grinding machine to produce parts according to set up sheets and router requirements.
Minimum five year experience in the operation of centerless grinding machines.
Attention to detail and an attitude of 100% compliance with all company and regulatory requirements.
Reference speeds and feeds charts and calculate the appropriate settings to maximize equipment capability.
Analyze best grinding method, given work material. Mounts grinding wheel and regulating wheel on spindles with wrenches.
Moves controls to set specified grinding speeds, feed rates, and spacing between wheel faces.
Grinder External Jobs
By Textron Systems: Lycoming Engines At , Williamsport, Pa
Perform other duties inherently required of the job classification.
Perform assigned work in a safety conscious manner.
Perform assigned work to specified quality and production standards.
Maintain equipment and tools used by the individual in a clean condition.
Perform assigned cleaning required to maintain individual's immediate work area in a clean condition.
Prepare and/or maintain all documentation necessary to the duties of the job classification.
Grinder Jobs
By WFI International At Houston, TX, United States

WFI International Division of Bonney Forge, the leading manufacturer and supplier of integrally reinforced branch connection fittings to the power, oil and gas, chemical, and other industries, is ...

Grinder Jobs
By Carlton Staffing Services At , Houston, 77040, Tx $16.50 an hour
Carlton Employees benefit from working for the BEST staffing agency in town! We offer our hard-working employees:
Description of Duties: Responsible for operating bench and portable grinder, drill press, and shop saw in a manufacturing machine shop environment.
$200 vacation bonus check after 1,200 hours of completed work
Employee of the Month awards, based on performance and feedback
$2 per day parking/toll reimbursement
Second-chance Candidates encouraged to apply
Grinder Jobs
By Mayday Manufacturing Co At Denton, TX, United States
High School diploma or General Education Degree (GED)
Certification from vocational / trade school in CNC machining
Previous experience operating centerless grinder, surface grinder, hone, or gun drill as a Grind & Hone Operator I, or equivalent
$18 - $27 Depending on Experience
Full Benefits Package Plus Vacation And Paid Days Off
Medical, Dental, Vision, Life, AD&D, and Short-Term Disability insurance benefits
Grinder Jobs
By Stand-By Personnel At Tulsa, OK, United States

Stand-By Personnel | Skilled Division

Grinder Jobs
By Stand-By Personnel At Claremore, OK, United States

Stand-By Personnel | Skilled Division

Fabrication Assembler Jobs
By Onin Staffing At Bay Springs, MS, United States
Role involves both assembly and quality control, offering a diverse workday
Experience with power and pneumatic tools
Have experience in automotive fabrication or diesel mechanic industry
Have strong basic math and measuring skills
Opportunity to work with a variety of tools and equipment
Assist in machinery or equipment repair
Precision Grinder Jobs
By Hydromat, Inc. At St Louis, MO, United States
What is the day to day like for a Precision Grinder
What You Need For This Job
Why pursue this career | Opportunity
Grinder / Polisher Jobs
By Mississippi Department of Employment Security At Vicksburg, MS, United States

REQUIRED KNOWLEDGE, SKILLS AND ABILITIES:

755 Hwy 27 Vicksburg, MS 39180

Machinist/Grinder Jobs
By Jersey Chrome Plating Co At Pittsburgh, PA, United States
­-Mechanical Experience.Willing to train the right individual.
­-Machining experience is a plus
-Operates and maintains manual and numerically controlled OD and ID grinding machines
­-Reviews drawings, instructions, blueprints to ensure accurate production
­-Selects appropriate machine, equipment, and settings for a given task
­-Plans proper sequence of tasks to complete the job
Grinder Jobs
By Stand-By Personnel At Catoosa, OK, United States

Stand-By Personnel | Skilled Division

Grinder Jobs
By Arcosa Inc. At Kutztown, PA, United States
Knowledgeable of required specifications on castings
Experience in similar or related job
Positions castings on work bench using hoist
Visually inspects castings and notes what work needs done
Positions and manually guides grinder or chipping hammer along specified guidelines on edge or surface of casting
Uses production gauges to verify specifications of castings are to standard
Barrel Grinder Jobs
By Elwood Staffing Services, Inc. At Bremen, IN, United States
Quality minded, must be familiar with basic SPC requirements
$ 19.00 to $ 20.00 / hour
Various shifts available ( Monday through Friday )
MAY TRAIN ON A DIFFERENT SHIFT
Initial loading and unloading of tumblers.
Recharge tumblers with grit and lime.
Fabrication Technician Jobs
By Johnson & Johnson At , Woburn
Assist engineers with experiments, data collection, qualifications, and reporting.
Excellent fine motor skills, including the ability to handle small, fragile materials using tweezers
Intermediate skills in speaking, writing, and reading in English
Experience using Microsoft Word, Excel, PowerPoint, and Outlook
Operate equipment in performing photolithography, mask alignment, metallization, and wet etching with glass and SOI wafers.
Safely handle chemicals typical of use in the above production processes, including hydrofluoric acid and tetramethylammonium hydroxide.
Hsse Advisor - Fabrication
By Orion At , Ingleside
Support contractor SSE management (ensure SSE's are working with mentors, crews are appropriate compliment per company policy / contract, etc.)
Prior Deepwater construction experience is preferred
Monitoring Contractors (KOS, Gate, GIS, Ace, Stallion, etc.) and subcontractor's compliance with the HSSE Program
Be highly visible in the worksite regularly engaging and coaching new individuals (in-field coaching on fall protection, DROPs prevention, barricading, etc.)
Being proactive and monitoring the use of safety equipment, personnel protection equipment and practices in the construction and Commissioning work areas
Working with the KOS and Gate safety representatives to achieve continuous improvement in safety practices, training and procedures
Fabrication Manufacturing Engineer Jobs
By Productive Resources LLC At Ankeny, IA, United States
Experience in primary (lasers), secondary (bend), welding (both manual & robotic).
Support daily operation by responding to tactical safety issues.
Participate in Continuous Improvement to achieve CI200 targets for safety.
Innovate & implement safety & ergonomic improvement ideas.
Specify and design tooling to improve safety both pro-actively & reactively.
Engineering background required and familiarity with Manufacturing/Mechanical/Industrial Engineering.
Laborer / Grinder Jobs
By Progress Rail Services Corp. At , East Chicago, 46312 $18.50 an hour
Benefits eligibility differs by job position and employment status - governing plan documents control such benefits..
Equal Opportunity Employer – Race/Color/Sex/Religion/National Origin/Sexual Orientation/Gender Identity/Vets/Disabilities
Willing to cross-train at other stations.
E. Chicago, IN Wheel Shop - 194
Starting wage is $18.50/hr with $1.50/hr increase at 90 days.
Production - Operations & Support
Fabrication Helper (Custom Fab)
By Johnson Controls At , Federalsburg
Comprehensive benefits package including 401K, medical, dental, and vision care
Encouraging and collaborative team environment
Dedication to safety through our Zero Harm policy
Provides support in assembly as needed for production of equipment.
Provides support in job preparation as needed for production of equipment.
Provides support in saw cut as needed for production of equipment.
Fabrication Jobs
By Lippert At , Perry, 32348, Fl
Comprehensive benefit offerings including medical, dental, vision, 401k with employer match, vacation, and more!
No experience or education required.
Reports defective materials or questionable conditions to the shift leader or production manager
Previous experience in a manufacturing setting preferred, but not required
Previous experience with machinery, basic machine set up, and small power tools preferred, but not required
A unique, inclusive and supportive company culture.
Metal Prep Grinder Jobs
By Liberty Safe At , Payson, 84651, Ut $16.50 - $17.50 an hour
Meet daily production requirements as scheduled
Work as a team to produce safes
Load/unload steel of the correct size based on needed parts
Verify parts are dimensionally correct and meet quality standards
Must be able to weld and/or grind to help the line if needed
Must be able and willing to run all machines if needed
Grinder Jobs
By Elwood Staffing Services, Inc. At Mentone, IN, United States
First Shift ( Monday through Friday from 07:00am to 03:30pm )
Manufacturing of industrial spring, agricultural springs, & equipment springs.
High School Diploma or Equivalent Required
Applicant may be subject to a background check
Pre-employment drug screen is required as a condition of employment
What's in it for you?
Fabrication Plant Manager Jobs
By Wabtec At , Erie, Pa
Prior Operational leadership experience in Union and Non-Union facilities
Strong track record of coaching & team engagement skills
Excellent oral and written communication skills
Strong interpersonal and leadership skills
Relocation will be offered for candidates that are eligible within guidelines.
Responsible for employee health and safety, regulatory compliance, and sustainability.
Fabrication Jobs
By Lippert At Perry, FL, United States
Comprehensive benefit offerings including medical, dental, vision, 401k with employer match, vacation, and more!
Reports defective materials or questionable conditions to the shift leader or production manager
Previous experience in a manufacturing setting preferred, but not required
Previous experience with machinery, basic machine set up, and small power tools preferred, but not required
A unique, inclusive and supportive company culture.
Career development and mentoring and opportunities to grow.

Are you looking for a challenging and rewarding career in fabrication? We are looking for a Fabrication Grinder to join our team! You will be responsible for grinding and finishing metal parts to exact specifications. You will also be responsible for inspecting parts for quality assurance and ensuring that all safety protocols are followed. If you have experience in fabrication and grinding and are looking for an opportunity to grow your career, this could be the perfect job for you!

Overview:

A Fabrication Grinder is responsible for grinding and finishing metal parts and components in a fabrication shop. They use a variety of tools and techniques to shape and finish the metal parts and components to the required specifications.

Detailed Job Description:

A Fabrication Grinder is responsible for grinding and finishing metal parts and components in a fabrication shop. They use a variety of tools and techniques to shape and finish the metal parts and components to the required specifications. This includes using hand grinders, belt grinders, and other grinding tools to grind, sand, and polish the metal parts and components. They must also inspect the parts and components for accuracy and quality.

What is Fabrication Grinder Job Skills Required?

• Knowledge of metal fabrication techniques and processes
• Ability to read and interpret engineering drawings
• Knowledge of grinding and finishing techniques
• Ability to use a variety of grinding tools and equipment
• Good hand-eye coordination and manual dexterity
• Ability to work in a fast-paced environment
• Attention to detail
• Ability to work with minimal supervision

What is Fabrication Grinder Job Qualifications?

• High school diploma or equivalent
• Previous experience in metal fabrication
• Ability to lift and move heavy objects
• Ability to work in a team environment

What is Fabrication Grinder Job Knowledge?

• Knowledge of metal fabrication techniques and processes
• Knowledge of grinding and finishing techniques
• Knowledge of safety procedures

What is Fabrication Grinder Job Experience?

• Previous experience in metal fabrication
• Previous experience in grinding and finishing metal parts and components

What is Fabrication Grinder Job Responsibilities?

• Grind and finish metal parts and components to the required specifications
• Inspect parts and components for accuracy and quality
• Use a variety of grinding tools and equipment
• Follow safety procedures when operating grinding tools and equipment
• Maintain a clean and safe work environment