Register
Recruit Create CV

2Nd Shift Quality Technician Jobs in Iowa

Quality Technician S/X, Powertrain Night Shift
By Tesla At , Fremont

**Internal employees within Powertrain strongly encouraged to apply**

Refrigeration Technician 2Nd Shift - Surlean Foods Dallas
By Surlean Foods Dallas At , Dallas, 75236
Adheres to all Environmental Management Systems/ISO 14001 practices and procedures.
Operation, testing, troubleshooting and repair of all rack-mounted, stand-alone gas refrigerant HVAC units.
Perform refrigeration, HVAC, boiler and hot water system PM’s.
Maintains the material integrity of the engine and utility rooms in accordance with established best practices.
Rebuilds ammonia, HVAC, boiler and hot water system components in accordance with technical manuals.
Adheres to all Company policies including but not limited to: safety, Good Manufacturing Practices (GMP’s) and Standard Operating Procedures (SOP’s).
Quality Inspector - 2Nd Shift: Monday-Thursday 10Hrs
By Sig Sauer Inc At , Tualatin, 97062
0-4+ years related experience or equivalent combination of education and experience.
Using the company operating system to generate inquiries, perform movement of material, and any other function required to perform job duties.
Comfortable with basic computer skills, including Microsoft Office.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
Efficient/effective planning and performance of routine and non-routine mechanical inspection using pre-determined methods for product acceptability.
Using corrective action system and subsequent follow up process to resolve deficiencies found during job function.
Anesthesia - Clinical Technician Iii 2Nd Shift
By University of Iowa At Iowa City, IA, United States
Assure that proper anesthesia related equipment is available and in the correct configuration for the next case.
Assembling and preparing intravenous (IV) solutions, invasive monitoring lines including: Arterial, CVP, PA/LAP, blood lines and carriers.
Continuous demonstration of team-oriented values.
Regular salaried position located in Iowa City, Iowa
For more information about Why Iowa?, click here
Classification Title: Clinical Technician III
2Nd Shift Quality Inspectors – Willing To Train, $16.50-$19.00/Hr
By Staffanation At Shandon, CA, United States
OVERTIME, ability to work 40-50hr per week $$$
Using inspection, measuring and test equipment
Performing a full range of varied inspection tasks including visual& touch point inspection
Performing administrative duties related to quality project work
Reading and following written and verbal work instructions
Identifying problems and questions and reporting them to appropriate supervisor
Quality Technician - 2Nd Shift
By STERIS At , Plymouth, 55447, Mn
Effectively manages work tasks. Is detail oriented and strives for continuous improvement.
PC experience and working familiarity of common desktop applications including Excel and Word.
Conducts in-process sub-assembly and final QC acceptance testing.
Assists in production line Quality investigations and associated problem-solving activities.
Investigates production line stoppages to identify corrective actions.
Identifies and documents product and process non-conformances.
Technician, Quality Assurance - 2Nd Shift
By Ramp Inc At , Tomahawk, Wi

RESPONSIBILITIES: Technician Functions · Demonstrate professionalism and respect at all times with internal and external customers. · Continually inspect all products during manufacturing to required ...

Qc Laboratory Technician (2Nd Shift)
By American Red Cross At , Dedham, 02026, Ma
Participates and/or assists in laboratory education and training. May serve as a trainer for new hires. Attends continuing education programs.
Good communication skills, with the ability to work on a team, as well as independently with minimal supervision
MT or MLT certification is a plus
May perform immunohematology blood bank procedures.
Performs quality control functions and daily equipment maintenance. Maintains Good Manufacturing Practices.
Performs tasks relating to ongoing evaluations and projects as requested.
Quality Technician, Seats (Night Shift)
By Tesla At , Fremont, Ca
Ability to perform detailed daily record keeping and reporting of quality issues that will be referenced by technicians, engineers, and management
At least 6 months of experience in an automotive, production or quality assurance environment
MS Suite Skills - Ability to create charts and perform basic calculations (percentages, sum, average etc.)
Experience with measurement and inspection tools (Calipers, Gap&Flush Gauges, Measuring Tape, etc.)
Perform Daily Vehicle Quality Audits at Quality gates across the factory to measure and improve Quality KPIs
Perform basic root cause and report defect trends to Quality leaders (using both written and verbal communication methods)
Technician, Quality Assurance 2Nd Shift
By Ramp Inc At , Tomahawk, Wi
REQUIRED SKILLS, ABILITIES AND QUALIFICATIONS:
Perform random inspection activities at a frequency determined by Quality Management.
Identifies weaknesses within the manufacturing process and relays this information to management
Assist in corrective action root cause analysis when deemed necessary by Quality Manager.
Previous Quality Assurance inspection experience in a manufacturing and/or fabrication setting preferred.
Welding experience in pressure vessels a plus.
2Nd Shift Automation Technician (Part-Time)
By Coca-Cola Consolidated, Inc. At , Clayton, 27520, Nc $24.40 - $30.50 an hour
Knowledge acquired through 1-3 years of work experience
High school diploma or GED; 2 years of education beyond high school in college or technical school
2+ years maintenance experience in a production, facility, or automation environment
2 years of education beyond high school in college or technical school in Mechatronics, Electrical Engineering, Automation Engineering
Pay Range: $24.40 - $30.50, depending on experience
Ensure automated warehousing system is operating effectively and efficiently by actively monitoring, assessing, and repairing, as needed
Mailroom Quality Assurance Associate (2Nd Shift)
By Conduent At , Lynnfield, 01940, Ma
Maintains Quality Management System (QMS) programs and initiatives.
Experience of working in a high-volume digital print mail facility
Experience of working with teams in a collaborative environment
Must possess excellent communications skills (i.e., interpersonal, written, verbal and presentation)
Job responsibilities include, but not limited to:
Provides critical information for audits and reviews/analyzes data and documentation.
Maintenance Technician - 2Nd Shift/3Fd Shift
By Greystone Logistics, Inc. At Bettendorf, IA, United States
Maintain records on repairs and PMs to meet the requirements of the Maintenance Supervisor.
Always maintain company standards per Housekeeping Responsibilities.
Have flexibility to complete projects and tasks assigned by the Maintenance Manager or Assistant Maintenance Manager.
Other job duties as assigned
Minimum of two years’ experience.
Perform PMs on plant equipment to include:
Quality Technician I - 2Nd & 3Rd Shift
By Boston Scientific Corporation At , Maple Grove, 55311, Mn
Use the inventory and traceability management systems to transact and research material.
Perform testing associated with product testing
Participate in and follow directions with regard to basic statistical analysis.
Assist engineers in failure analysis and CAPA activities.
Participate in continuous improvement projects.
Assist with quality issues and quality metrics-related activities.
Orthopedic Technician - 2Nd Shift Full Time
By Dayton Children's Hospital At , Dayton, Oh

Facility: Dayton Children's - Main Campus Department: Ortho Clinical Support - Main Campus Schedule: Full time Hours: 40 Job Details: Under the direction of a physician, provide ortho care services ...

Maintenance Technician (2Nd Shift)
By Nationwide Technical & Executive Search, Inc. At Oelwein, IA, United States
Permanent /Direct Hire Position, great company, excellent pay and benefits
On-site position and not Remote
Basic hydraulic knowledge (must be able to read hydraulic schematics)
5 years Industrial Maintenance experience.
PLC knowledge (Allen Bradley, 5, RS Logix 500 and RS Logix 5000)
Relocation assistance available for this position