Quality Lead Technician Jobs in Fremont, Iowa

Ability to have strong personable skills in communication, influence and basic email conversation

2+ years’ experience in automotive diagnosis, servicing, and repair techniques of automobiles (may be substituted for experience in production at Tesla)

Associate degree or Certificate in Automotive Technology or the equivalent in experience and evidence of exceptional ability

Ensure no cars leave respective area with open NCs

Build solid relationships in respective zone/pitches

Joint effort to inspect and repair vehicles at in-line when defects arise

Ability to perform detailed daily record keeping and reporting of quality issues that will be referenced by technicians, engineers, and management

At least 6 months of experience in an automotive, production or quality assurance environment

MS Suite Skills - Ability to create charts and perform basic calculations (percentages, sum, average etc.)

Experience with measurement and inspection tools (Calipers, Gap&Flush Gauges, Measuring Tape, etc.)

Perform Daily Vehicle Quality Audits at Quality gates across the factory to measure and improve Quality KPIs

Perform basic root cause and report defect trends to Quality leaders (using both written and verbal communication methods)

Work closely with cross functional team such as Technicians, QE, Production Management and PC to resolve issues.

Work closely with direct superior to manage and prioritize staffing assignments to meet the team objectives

Associate Degree or Certificate in Automotive Technology or the equivalent in experience and evidence of exceptional ability.

In the absence of direct Supervisor, will step in as acting Supervisor

Conducts Fault Injections and Inspector Calibration

Coordinate Inspector training to improve versatility without affecting business flow

Produce daily reports for management visibility

Ensure safety requirements are met and standardized work is followed

Directly lead team of Quality Fit Technicians to Meet daily safety, quality and production targets

Develop and coach team members. Maintain a training schedule

Assign daily workload and regularly communicate expectations

Escalate quality issues for quick resolution and provide solutions to existing problems

High school diploma or General Equivalent Degree (GED) required, or equivalent combination of education and experience.

The position is expected to perform the specified job duties within the allotted time, within the quality standards and prescribed methods.

Comply with company policies and procedures, including EHS and ISO requirements.

Minimum 3 years’ experience in quality.

Knowledge of Hydraulic/pneumatic systems desirable.

Computer Skills (Filling in Forms, logging in, navigating websites, etc.)

Must possess a high school diploma or equivalent combination of education and experience

2 years of experience in a manufacturing environment is preferred.

2 years of experience with precision-measuring equipment is preferred.

Knowledge of quality control processes

Perform receiving inspection of equipment/parts.

Perform inspection of equipment/parts in-house and at supplier facilities when applicable.

Provide feedback on compliance and standards to management.

Effective problem-solving skills and process/product relationship knowledge.

Computer skills: MS Excel including Michelin Pi DataLink, MS Word and working knowledge of Saufi & OSCAR are a plus.

B.S. Degree in Mechanical, Chemical or Material Science Engineering with Manufacturing Experience is desired.

Strong teamwork, leadership, and organizational skills.

Demonstrated organization and analytical skills at a level that shows creativity

Sustain the quality management system in partnership with Operations

Perform products and process audits to ensure Quality Management System (QSM) compliance

Demonstrated problem solving and root cause analysis skills (Why 5, Fishbone, etc..)

Ability to prioritize and multi-task various and conflicting responsibilities in a high energy production environment.

Computer literacy including working knowledge of the Microsoft Office Suite.

Prefer ASQ Certification: CQE, CQM, CQA, CQT, CRE.

Experienced in the areas of Interior Lighting & overall vehicle lit harmony for conformance to illumination requirements is preferred

Ability to create and deliver effective presentations to Management, with Managerial Courage.

Knowledge of product engineering, manufacturing processes and new vehicle launch process

Computer software skills – especially with Excel and PowerPoint

Self-motivated, Pro-Active, Decision Maker with ability to simultaneously manage multiple programs

Lead the evaluation of interior illuminated parts for assigned programs

Communicate trends and significant findings to management.

Demonstrated analytical problem-solving skills and knowledge of Good Laboratory Practices.

Lead QC department in customer, regulatory and certification audits.

Manage laboratory staff as dictate by business needs.

Well-organized, detail orientated and strong leadership abilities.

Demonstrate excellent organizational skills and the ability to prioritize based on company needs.

Support adherence and continuous improvement of pre-requisite programs including GMP’s, training, calibration, pest management, cleaning/sanitation, environmental monitoring, and allergen control.

Knowledge of quality assurance procedures and sampling requirements required.

Knowledge of HACCP, GMPs and FDA required.

Two pay increases within first year of employment!

401(k) Retirement Plan with up to a 7% company match

Paid Time Off (available on day 1)

Must have good communication skills and ability to effectively communicate across all departments and levels of management.

Execute transactions in inventory management system (release transactions, holds, transferers, etc.)

Demonstrated attention to detail, accuracy and analytical skills required. Must be able to prioritize work responsibilities and work independently.

Knowledge of Good Manufacturing Practices (GMP) documentation and ISO 13485 requirements preferred.

High School diploma with 2+ years related experience.

Must have strong computer skills and proficient use of Microsoft office

A BA/BS degree in a related field with a minimum of three years of relevant quality, inventory, or manufacturing experience

Strong leadership, communications, creative and facilitative skills, and interest in working in a team environment is required

Excellent benefit package including traditional medical, dental and vision insurance

Performs in-process and final inspections

Collects, analyzes and reports production quality data

Ensures outgoing customer shipments are accurate and complete

Responsible for documentation, sampling and quarantining of non-conforming material. Maintains other sample requirements as defined.

Basic math skills and ability to measure using a measuring tape.

Basic computer skills and able to learn the Spectrophotometer/Quality Control Program.

Prior experience in a manufacturing environment is preferred.

Follow all safety policies and procedures.

Must be able to use the Spectrophotometer/Quality Control Program on a computer.

Responsible for documentation, sampling and quarantining of non-conforming material. Maintains other sample requirements as defined.

Basic math skills and ability to measure using a measuring tape.

Basic computer skills and able to learn the Spectrophotometer/Quality Control Program.

Prior experience in a manufacturing environment is preferred.

Follow all safety policies and procedures.

Must be able to use the Spectrophotometer/Quality Control Program on a computer.

Responsible for documentation, sampling and quarantining of non-conforming material. Maintains other sample requirements as defined.

Basic math skills and ability to measure using a measuring tape.

Basic computer skills and able to learn the Spectrophotometer/Quality Control Program.

Prior experience in a manufacturing environment is preferred.

Follow all safety policies and procedures.

Must be able to use the Spectrophotometer/Quality Control Program on a computer.

Responsible for documentation, sampling and quarantining of non-conforming material. Maintains other sample requirements as defined.

Basic math skills and ability to measure using a measuring tape.

Basic computer skills and able to learn the Spectrophotometer/Quality Control Program.

Prior experience in a manufacturing environment is preferred.

Follow all safety policies and procedures.

Must be able to use the Spectrophotometer/Quality Control Program on a computer.

Excellent communication, collaboration, and team management skills.

Strong hands-on experience working with Defect and Test Management tools like JIRA and TestRail

Collaborate closely with cross-functional teams, including product managers, developers, and other stakeholders, to understand requirements and user stories.

Proficiency in test management tools, issue tracking systems, and relevant software development methodologies.

Strong experience working in a SaaS enabled environment with product(s) supporting multi-tenant features/capabilities.

Lead and manage a team of QA analysts / engineers, fostering a culture of quality, collaboration, and continuous improvement.

Managerial/Supervisory experience, leadership, and communication skills.

Have knowledge of measurement equipment.

Bachelor's degree or equivalent experience

Strong experience in manufacturing quality, supply quality assurance, supplier product quality development

Experience in managing Quality Engineering processes and operations, experience with problem-solving tools, and Quality Standards

Previous experience as a quality

Maintain a safe working environment, adhere to safety principles, and maintain accepted housekeeping standards.

Uses the customer inspection standards to sort fully assembled products for all appearance and/or assembly defects that might be present.

Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations.

Ability to stand or walk on concrete floor for 8+ hours and lift and/or move up to 50 lbs.

Requires hand, arm back, and leg strength; also, bending and squatting ability

Must have eye, foot, and hand coordination, and be able to do repetitive grasping, pushing, pulling, and fine motor manipulation

Verify order compliance (certs, govt requirements/order requirements met)

High School Diploma or equivalent required. Associates Degree or Manufacturing/ Quality Technical Certification preferred

Advanced metrology skills required. Ability to teach new associates on a regular basis

3 years of manufacturing experience (assembly or machining) desirable.

Troubleshooting and root cause identification capabilities.

Ability to break down problems into manageable and actionable components, poised to make progress on resolving issues.

3 years of related Quality Control experience in a manufacturing environment preferred

Knowledge around water chemistry and microbiology is preferred

Experience with Documentation and Record-Keeping is necessary

Someone capable to work independently, prioritize, and manage time.

Week 1: Monday Tuesday Friday Saturday

Week 2: Sunday Wednesday Thursday

Experienced with Microsoft Excel, Word, and PowerPoint.

Ability to train the Terex Utilities team on Quality Standards and Customer Requirements.

Other Job duties as assigned

High School Diploma and/or equivalent experience

2-3 years of proven experience in Assembly/Installation, Testing, or Inspection.

Willingness to be flexible to learn new skills based on the need of the company

Responsible for conducting sensory sessions for semi-finished and finished product

Enters, transcribes, records, stores, and maintains information in written or electronic form.

Supports operators to verify that the auto-control activities are put in place correctly.

Quality Control Analysis - conducting tests and inspections of products, materials or processes to evaluate quality or performance

Operation Monitoring - understanding gauges, dials, or other indicators to understand quality problems on machines

Using mathematics and statistical analysis on data and results’ trending.

Perform quality checks of weight, size, volume, taste of Frito-Lay product

Visually inspect wrapping and packaging of product to ensure it meets quality standards

You are 18 years of age or older

You are able to work on weekends, holidays as well as off shift as needed

You can stand and walk for extended periods of time with or without a reasonable accommodation

You can climb, bend, reach, stoop, kneel, and stretch for extended periods with or without a reasonable accommodation

Preferred 2 years of proven work experience in a production environment as a Quality Technician, Quality Inspector, or similar role

High School Diploma or associate degree

2nd Shift hours: Monday - Friday 3:00pm - 11:30pm. Strong possibility of overtime and weekends as needed.

Crystal Springs, Mississippi, United States of America

Experience in quality related field

Experience in manufacturing/quality related field.

Who You Are (Basic Qualifications)

experience in quality related field

experience in manufacturing/quality related field.

Review all customer quality complaints via SAP QN system.

Manage nonconforming material through the MRB process to ensure that nonconforming material is identified, appropriately dispositioned, tracked, and reported

2+ years experience in a Manufacturing Quality Control environment

Inspection/verification of in-process, Moxion built material

Troubleshoot and perform rootcause investigation/resolution of daily quality issues

Provide data input and output reports to assist in quality improvement activities

Provide mechanical measurement support to identify or solve potential material issues