Register
Recruit Create CV

Electrical Reliability Engineer Jobs in Ball Ground, Cherokee, Georgia

Electrical Engineer Jobs
By Cryoport At Ball Ground, GA, United States
Experience with power management (AC and battery power) for low-voltage devices
Good communication skills, both written and oral
Five years relevant experience in electronic firmware and hardware design
Experience programming ARM and PIC microcontrollers
Firmware and software experience using programming languages such as C, C++, and Python
Testing and troubleshooting experience utilizing multimeters, oscilloscopes, logic, and spectrum analyzers
Electrical Engineer Jobs
By GigaGrid At Atlanta, GA, United States
Experience with Lithium-ion batteries, battery management systems etc. is a plus.
DFM techniques, best practices for manufacturability, PCB stack ups, BOM management, production runs etc.
Power electronics, switching power converters, topologies, devices, power dissipation, thermal management.
Knowledge of basic control theory and experience with programming languages for firmware and scripting – C, C++, Python, MATLAB.
Take ownership of designs, and manage individual tasks, deadlines, and deliverables.
Experience in hardware architecture, board design, board bring-up and prototype and new product experience.
Electrical Engineer Jobs
By Mercer University At , Warner Robins, 31088, Ga
Adheres to approved MERC MSP quality management policies and principles, and promotes an attitude of commitment to continuous quality improvement.
Provides detailed technical information to program managers including cost, schedule, and technical risk assessments at all stages of implementation.
Ensures familiarity with all MERC core capabilities, and with current and potential customer base.
Additional requirements may be added as appropriate and as specified in the specific Personnel Requisition Form.
Final rank will be determined on the qualifications of the selected candidate.
Responsible for designing and performing detailed engineering efforts in the assigned discipline, including but not limited to the following tasks:
Engineer, Reliability Jobs
By Mauser Packaging Solutions At Newnan, GA, United States
Lead the development, implementation and maintenance of a life cycle asset management process for components, equipment and processes at all facilities.
Lead investigation of root-cause for repetitive damage and failure rates. Lead change in equipment risk management and reliability processes.
Bachelor’s degree in Mechanical Engineering (or equivalent industry experience)
10 years’ experience in a related position or field with a preferred background in Industrial Maintenance
Extensive knowledge in facility infrastructure, support equipment.
Experience handling multiple projects simultaneously.
Sr. Reliability Engineer Jobs
By Shell At , Geismar, La
Knowledge of project management to drive MEC implementation per schedule.
Knowledge of the concepts of Risk Assessment, Reliability Centered Maintenance, Management of Change, and Causal Learning.
Regular risk assessment meetings are conducted. GUS (Global Utilization System) focal point as assigned. GUS focal point responsibilities include:
Minimum Seven (7) years of related Manufacturing Industry experience, Petrochemical or Refinery experience preferred.
Related experience in reliability maintenance (including at a minimum causal learning/failure analysis and understanding of execution processes (turnaround and routine maintenance).
Strong trouble-shooting and analytical skills.
Lead Electrical Engineer Jobs
By Partnered Resources At Atlanta, GA, United States
• Manage relationships with electrical suppliers and local utility providers as necessary.
• Minimum 5 years of experience developing electrical infrastructure for a manufacturing facility.
• Minimum 2 years of supervisory experience.
• Experience working in Petrochemical, Heavy Industrial, Oil & Gas, Plastics, or Paper Manufacturing industries.
• Ability to manage multiple projects on different timelines.
**This role will be responsible for all Low Voltage systems in the facility (480VAC and below)**
Reliability Engineer Jobs
By Mars At , Chattanooga, 37402, Tn
Proven analytical capability and change management capability
Bachelor’s degree in Technical discipline is preferred or 10 years of related experience in a manufacturing environment
Knowledge of manufacturing technologies and pipeline practices
Comprehensive lubrication program (requirements, frequencies, and methods of application).
An industry competitive salary and benefits package, including company bonus
What will be your key responsibilities?
Reliability Engineer Jobs
By BASF Corporation At , Attapulgus, 39815, Ga
Knowledge and experience to provide technical guidance
5 / 9 Years of experience in a Reliability/Maintenance role.
Knowledge of API and ASME codes preferred. Also, knowledge of SAP preferred.
Thorough knowledge of mechanical equipment design and detailed understanding of maintenance and reliability activities associated with process equipment
Excellent computer skills to include CMMS software, manufacturing software, spreadsheets and word processing software.
Excellent communication skills, both written and verbal. Ability to influence, persuade and negotiate. Strong interpersonal skills.
Reliability Engineer Jobs
By Oxbow Calcining International LLC At , The Woodlands, 77380, Tx
Supports management with special projects and workflow process improvements and other duties as assigned.
Responsible for workforce development, including supervisor skills enhancement, maintenance skills, technical and troubleshooting, and other training.
Should have a thorough knowledge of calcining operations and maintenance.
Five (5) years of experience in heavy industrial/heavy manufacturing maintenance.
In depth knowledge of the calcining process or Portland cement manufacturing preferred
Support Capital and Expense projects using reliability and maintenance centered approaches, including Major and Specialized Maintenance Activities.
Electrical Engineer I Jobs
By Exyte GmbH At , Chandler, Az
Good time management skills, strong work ethic and attention to details
Good verbal and written communication skills
Explore your tasks and responsibilities
Assists in providing specialized technical input to studies and design for staff’s specific area of expertise
Coordinates with the project team and other disciplines as well as other design offices
Must be a strong team player with an ability to build effective working relationships with individuals, department leads, and client representatives
Sr. Electrical Engineer Jobs
By Nationwide Technical & Executive Search, Inc. At Atlanta, GA, United States
Demonstrated experience with the use of computer-assisted engineering tools and general knowledge of test equipment.
Relies on experience and judgment with very limited instructions to plan and accomplish goals.
Reports to executive or manager.
Reads requirements and specifications to fully understand the systems required for the components being used.
Generates designs per the outlined requirements and specifications.
Advanced level degree in Electrical and Computer Engineering or equivalent professional knowledge required.
Electrical Engineer Jobs
By ESPO Corporation At Carpentersville, IL, United States
Minimum 1-2 years of experience in concept-through-production product development
Audio and Analog circuit design experience (OpAmps, Filters, Transistor Circuitry, Codecs, Power Supplies, etc)
Digital and microprocessor circuit design experience
Schematic Entry (Altium experience is a plus)
Some embedded coding experience is a plus
EMC and Intrinsically Safe (UL, ATEX, FM) circuit experience a plus
Electrical Engineer Jobs
By Eden Capital Careers At Albuquerque, NM, United States
Perform design reviews with customer to ensure the plans meet the project requirements
3 years (min.) experience in electrical Engineering
Good working knowledge of building codes, zoning regulations and the approval process
Position requires great organizational skills and self-motivator who can finish projects without direct supervision
Developing construction drawings based on provided scope of work
Take conceptual rough plan mark-ups and create final design documents
Electrical Engineer Jobs
By RENK America At Muskegon, MI, United States
Experience with critical grounding design, low noise design and EMI/EMC and ESD compliance.
Familiar with requirements and quality standards of IPC/WHMA-A-620 Class I, II and III.
Harness design software experience preferably Capital Harness XC / Capital Logic.
Ability to manage and organize multiple project tasks to meet established deadlines.
Minimum five (5) years hands on experience in design of rigid, rigid/flex, and flex PCBs.
Design and develop wiring harnesses.
Associate Electrical Engineer Jobs
By Sargent & Lundy At Tampa, FL, United States
office and the remainder working remote from home
1 or more years experience in the power or electric utility industry.
Ability to prioritize work and manage multiple projects under budget and time constraints.
Excellent interpersonal and written communication skills.
Experience in reviewing design drawings created by others.
1 or more years experience in the design of substations 138kV and above.
Reliability Engineer Jobs
By Saxon AI At Everett, WA, United States
9+ years of experience with commercial airplane certification, safety requirements and procedures
14+ years related work experience or an equivalent combination of education and experience
9+ years of experience performing system safety analysis and/or studies
Experience conducting Airplane Level Safety Analysis
Working knowledge of ARP4754 and ARP4761
Experience with FAR Part 25.1309, and industry practices like ARP 4761 & 4754
Electrical Engineer Jobs
By KBM ARCHITECTURE At New York, NY, United States
Test finished products and system capabilities
Strong problem solving, technical, math and science skills
Evaluate electrical products and systems by designing testing methods
Contribute to team efforts by accomplishing related results
Bachelor's degree in Electrical Engineering or related field
Strong written and verbal communication
Electrical Development Engineer Jobs
By Ignite Recruitment At Houston, TX, United States

Preferred valve/flow control industry experience.

Ability to Make an Impact:

Electrical Engineer Jobs
By JMS Engineering At Greater Tampa Bay Area, United States
Coordinate with clients on project requirements and status updates.
Coordinate with regulatory agencies to understand local permitting requirements and submit permit documents for review and approval.
0-4 years of related experience
Strong written and oral communication skills with both internal employees and external clients
Revit experience is a plus
Attend and document client kick-off and progress review meetings.
Camera Engineer----Electrical Engineer Jobs
By The Photonics Group At Princeton, NJ, United States
5 years industry experience in imaging products
Experience with mixed-signal analog/digital design
Experience with new systems develop and R&D
Bachelor’s degree in EE or other sciences
US Citizen or Green card holder
Mixed Signal Design: Camera Engineer
Electrical Engineer I Jobs
By Luxium Solutions At Hiram, OH, United States
Utilize project management skills to maintain project schedules
Interpretation of specifications and requirements
Performing analog and digital electronic design
Design, develop, assemble and test prototype electronics and test fixtures
Provide technical guidance for electronics and radiation detection physics for Luxium Solutions products
Lead Continuous Improvement efforts and/or obsolescence of established and legacy designs
Electrical/Optics Engineer Jobs
By IEQmax Inc At Denver, CO, United States
Confirms systems’ and components’ capabilities by designing testing methods.
Assures product quality by designing electrical testing methods and testing finished products and system capabilities.
Designs electrical and optical systems by developing and testing components.
PCB design, test, and manufacturing
Evaluates electrical and optical systems, products, components, and applications by designing and conducting research programs.
Works with manufacturing partners to create responsive manufacturing processes for our products
Electrical Engineer Jobs
By bp At Whiting, IN, United States
Experience and working knowledge of:
Minimum of 5 years of relevant experience.
Provide technical review, guidance and approval of design engineering and construction contractor deliverables.
Equipment specification and selection and engineering package technical content.
Technically evaluate requests for exceptions to specifications or standards.
Determine risks to delivery and ensure adequate risk mitigation plans are in place.
Electrical Engineer Jobs
By Aegis Power Systems, Inc. At Murphy, NC, United States
Manage feasibility studies and technical analysis to support new products
Manage/control documentation in a timely, efficient manner following internal ISO9001:2015 / AS9100:2016 procedures
Experience with military electronics standards (MIL-STD-1275, MIL-STD-704, MIL-STD-810, MIL-STD-461, etc.) or equivalent automotive standards
Responsibilities include, but are not limited to:
Understand and follow assorted industry design standards to ensure product success
Support design reviews with contributions to improve design, cut costs, improve speed, and ensure accuracy of project
Electrical Engineer Jobs
By Bison Technologies Inc At Mesilla, NM, United States

2+ years experience at a lab, a tech company or reputable place where there is at least one solid reference. For this position, we are looking for a leader, a person with an electrical engineering ...

Electrical Engineer Jobs
By Atomic Machines At Santa Clara, CA, United States
Schematics entry, layout, and library management (Altium Designer preferred)
Excellent bring-up and debugging skills
Soldering and test and measurement shop skills
Knowledge of scripting languages to write test programs
FPGA skills (Verilog or Systemverilog preferred)
Bringup, debugging, and prototyping of electromechanical systems
Electrical Engineer Jobs
By Niche DEI Staffing Boutique, LLC At Greater Milwaukee, United States

Allow Niche DEI Workforce & Staffing Boutique, LLC. to help you better understand how diversity, equity and inclusion benefits you as an employee by offering not only certified consultative ...

Electrical Engineer Jobs
By Holcim US At , Morgan, 84050
Competitive salary based on experience and qualifications
Required Work Experience: 0-2 years
Required Computer and Software Skills: Computer skills, including Excel, Word, Project, etc.
Travel Requirements: 10% for training, development and potential projects
Vision and other voluntary benefits and discounts
Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas.
Staff Engineer, Electrical Jobs
By Abbott Laboratories At , Saint Paul $90,700 - $181,300 a year
Communicates with the other engineering personnel to coordinate the interrelated design and assure project completion.
May act as internal consultant providing technical guidance on most complex projects.
This is a non-supervisory position.
Under general direction, has duties of instructing and checking the work of other design engineers.
Responsible for designing new products and processes and improving and maintaining existing products.
Associates Degree (± 13 years)
Electrical Engineer Series Jobs
By Metropolitan Transportation Authority At , Brooklyn, 11201 $77,921 - $122,168 a year
Based on evaluation of education, skills, experience, and interview.
The MTA encourages qualified applicants from diverse backgrounds, experiences, and abilities, including military service members, to apply.
Thorough knowledge of Substation equipment, Negative return system, Corrosion and Stray current issues.
Full knowledge of NYCT Subway system, Yards, shops, and Transit Railcars
Work as a team player.
Title: Electrical Engineer level I- III

Are you looking for a challenging and rewarding career in Electrical Reliability Engineering? We are looking for an experienced Electrical Reliability Engineer to join our team and help us ensure the reliability of our electrical systems. You will be responsible for developing and implementing strategies to maintain and improve the reliability of our electrical systems. You will also be responsible for troubleshooting and resolving electrical issues, as well as providing technical support to other departments. If you have a passion for electrical engineering and a commitment to excellence, we want to hear from you!

A Electrical Reliability Engineer is responsible for ensuring the reliability and safety of electrical systems and equipment. They are responsible for developing, implementing, and maintaining reliability programs, as well as providing technical support and guidance to other departments.

What is Electrical Reliability Engineer Skills Required?

• Knowledge of electrical systems and components
• Knowledge of reliability engineering principles and practices
• Ability to analyze and interpret data
• Ability to troubleshoot and solve complex problems
• Strong communication and interpersonal skills
• Ability to work independently and in a team environment

What is Electrical Reliability Engineer Qualifications?

• Bachelor’s degree in Electrical Engineering or related field
• Professional Engineering (PE) license preferred
• 5+ years of experience in electrical engineering and/or reliability engineering

What is Electrical Reliability Engineer Knowledge?

• Knowledge of electrical systems and components
• Knowledge of reliability engineering principles and practices
• Knowledge of safety standards and regulations
• Knowledge of industry best practices

What is Electrical Reliability Engineer Experience?

• Experience in developing and implementing reliability programs
• Experience in troubleshooting and solving complex electrical problems
• Experience in working with electrical systems and components

What is Electrical Reliability Engineer Responsibilities?

• Develop and implement reliability programs for electrical systems and equipment
• Monitor and analyze electrical system performance
• Troubleshoot and solve complex electrical problems