Maintenance Engineer - Predictive Maintenance - Cemp

Company Overview for Formosa Plastics Corporation, U.S.A.
Founded in 1978, Formosa Plastics Corporation, U.S.A. (Formosa Plastics) is a growing, vertically-integrated supplier of plastic resins and petrochemicals. With annual revenues of more than $5 billion, we employ over 2,800 people who operate 20 production units in six business divisions - Olefins, Polyolefins, Vinyl, Specialty Polyvinyl Chloride, Chlor-Alkali, and Oil & Gas.
Formosa Plastics offers a full line of polyvinyl chloride, polyethylene and polypropylene resins, caustic soda and other petrochemicals that deliver the consistency, performance and quality that customers demand. We market our polypropylene and polyethylene resins under the Formolene® tradename; we market our suspension PVC and specialty (dispersion) PVC resins under the Formolon® tradename. We also produce and sell caustic soda, ethylene dichloride, commercial bleach and hydrochloric acid.
We are committed to supplying the highest quality products and services to our customers, providing a safe and healthy workplace for our employees and contributing to the quality of life in the communities where we operate. This commitment is made possible through our dedicated people, consistent products, continued protection of the environment and ongoing investments in new product development, quality control systems and safe, modern and energy-efficient production facilities.
Formosa Plastics is a privately held company headquartered in Livingston, New Jersey. Our core business, producing plastic resins and petrochemicals, takes place at three wholly-owned chemical manufacturing subsidiaries located in Delaware City, Delaware, Baton Rouge, Louisiana and Point Comfort, Texas.
TITLE: Mechanical Integrity Engineer
DEPARTMENT: Predictive Maintenance - CEMP
I. POSITION OBJECTIVE
This position exists to provide assistance and recommendation on corrosion-related evaluation through participating in P&ID review, equipment specification review, damage mechanism review of equipment inspections, Equipment Abnormal Analysis review, PSM operations issues review, RBI corrosion research and Evaluation, incident investigations, project review/study, inspection and maintenance audit.
II. MAJOR AREAS OF ACCOUNTABILITY

• Corrosion Control and Maintenance: Assist in the Development and maintenance of the Corrosion Control Manual with Operating units. Review and improvement of corrosion standards and procedures with Operating Units. Provide improvement for identified corrosion problems. Carry out failure analysis on corrosion-related leakage or VOC occurrence and failure investigations in order to enhance the safety and integrity of the plant. Provide recommendations and training to operations/maintenance personnel and support the leadership team.
• Technical Support: Provide technical resources in the analysis of data and damage mechanisms. Knowledge, skill, and ability to document activities and inspections as well as review same to discern issues with the accuracy of data and information contained in reports prepared by others. Knowledge, skill, and ability to Interpret and apply the company’s procedures with an appreciation of underlying industry codes and standards and government regulations. Knowledge, skill, and ability to defend the company’s technical and procedural positions related to corrosion control activities and represent the company in an agency audit, inspection, or enforcement action.
• THM: Promote cleanliness and order through the implementation of the Total House Keeping Maintenance program. Emphasize Nothing Touch Ground program and No Visual Pollution program. Maintain the plant in like new condition.
• Program Development: Development, review, and maintenance of CEMP, CUI, CUF, and RBI programs. assist and train on corrosion-related PM/PdM program activities, such as corrosion rate calculation and assess the risk of CEMP, CUI /CUF, and RBI evaluations. Assist in the development of PSM equipment ITP.
• Manage and Lead: Oversee corrosion-related regular or T/A operation, maintenance, and inspection activities. Assist in the technical development and mentoring of operations/inspection group corrosion control/inspection personnel through routine interactions and providing technical review and support.

III. QUALIFICATIONS

• No experience is required, but 5 years of experience in mechanical engineering and inspection/cathodic protection experience is preferred. Knowledge of Material Sciences and Engineering preferred.
• BS in Mechanical Engineering or Material Science and Engineering (Corrosion Science and Engineering) degree.

Check Out Our Benefits
Health Coverage and Perks
Excellent medical, dental, and vision insurance plans
Flexible spending accounts for health, dependent care
Short-term Disability
Long-term Disability
Group Term Life, Dependent and
Supplemental Life Insurance
Tuition Reimbursement
​​​​​​​
Work/Life Balance
10 Paid Holidays
Paid Time Off for a balanced life
(Vacation, Sick and Personal Time)
FlexTime Available
Competitive Compensation
Competitive salary, incentive/bonus, 401(k) plan with match and profit-sharing match,
Cash Balance Pension Plan and equity for all employees