Qc Label Room Inspector Jobs in Trinity, Texas

Conduct inspections in accordance with prints and/or inspection forms at specified points to ensure conforming products for primary parts and sub-assemblies.

Document all inspections, both conforming & non-conforming in specified locations/software.

Report all non-conforming products/inspections & place on hold if for disposition.

Demonstrates good organizational, planning and time management skills

EDUCATION AND WORK EXPERIENCE REQUIREMENTS:

Knowledge, Skills, And Abilities Required

Work closely with the field quality staff acting as their field representative ensuring construction understands and follows the QA/QC requirements

Inspection related certifications, such as NDE, preferred

The Quality Inspector must be a self-starter, be organized and have good interpersonal skills

Knowledgeable in requirements for inspection of high-strength bolted connections in accordance with RCSC.

Equipment/Tools Knowledge & Skills: may include but not limited to a Tape measure, weld gauges, level, square, & flashlight.

Completion of a verifiable vocational or training program may substitute for one (1) year of experience.

Knowledgeable of dimensional tolerances in accordance with the AISC Code of Standard Practice and AWS Structural Welding Codes.

Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure.

High School Diploma or equivalent and at least 3 years of related experience.

Essential Duties and Responsibilities include the following.

Understanding of electrical wiring, fabrication, and testing of control panels under a UL 508A & 698A panel environment.

Understanding of PLC logic and software platforms for I/O testing such as Allen-Bradley, Modicon, Siemens, and Motorola.

Understanding and disciplined to writing, clear corrective actions on deficiencies and follow up upon request.

Understanding of Non-Conformance and corrective measures to adhere to standards.

Develop written reports illustrating opportunities for improvement based on factual findings.

Knowledge, Skills & Abilities Required:

Notify management of any discrepancies found

Knowledge and experience with power tools, testing equipment, test lamps, measuring devices, power construction equipment

Inspect the production quality to establish requirements are being met

Comprehensive Knowledge of Electrical Quality Control processes, procedures, standards and specifications

Knowledge of electrical systems, equipment, operational and mechanical systems including; installation, test, maintenance, and repair

Demonstrates good organizational, planning and time management skills

EDUCATION AND WORK EXPERIENCE REQUIREMENTS:

KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED:

Work closely with the field quality staff acting as their field representative ensuring construction understands and follows the QA/QC requirements

Inspection related certifications, such as NDE, preferred

The Quality Inspector must be a self-starter, be organized and have good interpersonal skills

Samples materials and products according to statistical and laboratory requirements established following applicable procedures.

Inspects packaging component to ensure containers comply with requirements regarding essential information and satisfactory conditions of containers.

Samples, evaluates, and documents Packaging components according to statistical and laboratory requirements following the applicable procedures.

Assures correctness of sample quantity according to SOP requirements.

Destroys retains samples according to regulatory and SOP requirements according to schedule.

Associate Degree with one (1) year of experience in the Pharmaceutical Industry in Quality Control Department.

Document inspection results by completing reports/logs and inputting data into OPD’s Construction Management System (CMS).

2+ years of experience as Quality Control Inspector in the Oil & Gas Industry.

5+ years of experience as Quality Control Inspector in the Oil & Gas Industry

ASNT Level II VT Certification.

API Certifications (570, 510, or 653)

Knowledge of AMSE Section V, IX and B31.3.

Have some knowledge of computers

Good communication & writing skills

Second Shift ( Monday through Saturday from 05:30pm to 04:00am )

High School Diploma or equivalent

Able to work with mathematics

Applicant may be subject to a background check

Verify special processes and the relevant workers’ qualifications.

A working knowledge of BS/IEC/ISO/API/ATEX/EEMUA codes and standards relating to electrical and instrumentation work

Working knowledge of construction standards, codes of practice and regulations/legislation relating to electrical and instrumentation work

Knowledge of safety legislation and regulations

Hazardous Area installation and inspection experience is an advantage

Issues the relevant Quality Records and, when necessary, writes and sends to QC Supervisor non-conformances reports.

Completion of a high school diploma or GED and a minimum 1 years of experience is required.

3-5 years experience which includes Quality and/or Industry experience is preferred.

Performs inspection of various operations activities.

Identifies and reports non- conformance to known standards using various measuring and testing methods.

Assures that all products and processes represent the desired quality, safety, efficiency and reliability levels.

8432 South Intersate 35W, Alvarado, Texas, 76009, United States

Notify management of any discrepancies found

Knowledge and experience with power tools, testing equipment, test lamps, measuring devices, power construction equipment

Inspect the production quality to establish requirements are being met

Attends training sessions, seminars and appropriate educational classes required by department.

Notifies supervisors of any discrepancies found between work completed and material installed and owner or client quality requirements.

Education: High School Diploma or equivalent, required. Bachelor degree in Engineering field or Business Administration is preferred.

Understand and apply Quality Management System (QMS) procedures

Verify that incoming goods and finished products meet all requirements as listed in the specifications

Good basic math skills (including percentages, fractions, and decimals) are required

6 months+ quality control experience preferred

Write inspection reports to capture information and submit to QC Supervisor/delegate employee

Enter Inspection reports in a timely manner into the QC Software

Minimum of 10 years’ experience in QA/QC inspections/Audits on major oil & gas/construction projects

Good communication skills, both oral and written.

Ability to work with Contractors and Suppliers and develop good working relationships.

The QA/QC Inspector will be responsible for Offshore FPU Oil & Gas projects.

Entry level position, no prior work experience required

1-3 years of experience which includes Quality and/or Industry experience is preferred

Identifies and reports non-conformance to known standards using various measuring and testing methods

Assures that all products and processes represent the desired quality, safety, efficiency and reliability levels

Completion of a high school diploma or GED is required

Ability to read engineering dwg and schematics preferred

Trains new, entry level, and less experienced Quality Auditors through on-the-job training, group training, and one-on-one guidance.

Minimum 4 years Related work experience

Minimum Experience / Training Required

Career development with an international company where you can grow the career you dream of .

Free medical coverage for employees* via the Health Investment Plan (HIP) PPO

An excellent retirement savings plan with high employer contribution

Trains new, entry level, and less experienced Quality Auditors through on-the-job training, group training, and one-on-one guidance.

Minimum 6+ years Related work experience

Minimum Experience / Training Required

Career development with an international company where you can grow the career you dream of .

Free medical coverage for employees* via the Health Investment Plan (HIP) PPO

An excellent retirement savings plan with high employer contribution

3 + years in data management and material testing or manufacturing.

Data management of the PO, MTR and COC to be uploaded in Accorde system.

Apply Weatherford, and where appropriate Client Company Quality, Health, Safety & Environment Policy and Management Systems.

Experience of reporting inspection findings Experience of inspection within a repair/manufacturing facility

Good Knowledge about purchase process followed in Manufacturing plant in an MNC.

Excellent verbal and written communication skills.

Provide management of all contract data and deliverables in accordance with Quality Control Plan requirements

Maintain Quality Control data using QCS/RMS or other client approved Quality Control data management systems

Familiar with the requirements and experience in the areas of hazard identification, safety compliance, and sustainability

Serve (when needed) as the Site Quality Control Manager in accordance with the Project Quality Control Plan

Maintain effective communications with clients, subcontractors, and Project Manager

Ensure subcontractor’s adherence to all quality control contract requirements

Environmental Management Systems (EMS), and other regulatory requirements.

Support all Company initiatives as identified by management and in support of Quality Management Systems (QMS),

Complies with U.S. Food and Drug Administration (FDA) regulations, other regulatory requirements, Company policies, operating procedures, processes, and task assignments.

0-2 years' experience. Previous experience in Quality performing inspection. Prior medical device component inspection experience preferred.

Experience with optical measurement equipment, hand tools, gages, pressure and force gage testing.

Training in blueprint reading and experience with inspection sampling techniques.

Previous experience as a Quality Control Inspector or in a similar role is preferred.

Knowledge of quality control principles and practices.

Excellent communication skills and ability to work effectively in a team environment.

**There will be a skills assessment that must be completed to be considered.

Work Location: Hybrid remote in Livermore, CA 94550

Perform inspections on incoming materials, in-process components, and finished products using precision measuring instruments such as micrometers and calipers.

Completion of a high school diploma or GED and a minimum 1 year of experience is required.

3-5 years’ experience which includes Quality and/or Industry experience is preferred.

Performs inspection of various operations activities.

Identifies and reports non- conformance to known standards using various measuring and testing methods.

May be responsible for conducting the magnetic particle and penetrant testing of parts and initiating and processing non-conformance reports.

Assures that all products and processes represent the desired quality, safety, efficiency and reliability levels.

Support special projects as assigned by management

Maintain compliance with the company’s quality management system through training and adherence to policies, procedures and work instructions.

Quality Assurance and Regulatory Affairs management (special projects)

Minimum Knowledge & Experience Required for the Position:

Minimum of five (5) years previous Quality Control (QC) and/or Quality Assurance (QA)experience required.

Previous experience working in a regulated medical device manufacturing plant

A technical school graduate or have a Bachelor’s degree in Engineering or Construction Management

Knowledge of construction practices and principles

Intermediate mathematical skills in order to perform field calculations

2+ years in construction administration/ pipe installation/inspection/CDOT

Ability to gather and understand technical data for purposes of generating technical reports

Proficient in MS Office Suites and MS Project

Benefits on offer for this contract position:

Compares inspection results to defined requirements or specifications and documents differences found.

Makes minor adjustments or repairs accepts, rejects items, or reroutes for rework based on established guidelines and knowledge of production techniques.

Compiles and maintains quality requirements documentation.

4-6 Years work experience required

Performs varied product inspections, generally of in-process sub-assemblies, finished goods, components, incoming materials, by observing, measuring, and recording data.

Demonstrates good organizational, planning and time management skills

EDUCATION AND WORK EXPERIENCE REQUIREMENTS:

Work closely with the field quality staff acting as their field representative ensuring construction understands and follows the QA/QC requirements

Have a working knowledge of the code(s) of construction being used for the project

High School Graduate or equivalent (GED) plus 3-5 years' experience in the Construction Trades

Inspection related certifications, such as CWI, preferred, in some cases required

Knowledgeable in requirements for inspection of high-strength bolted connections in accordance with RCSC.

Equipment/Tools Knowledge & Skills: may include but not limited to a Tape measure, weld gauges, level, square, & flashlight.

Completion of a verifiable vocational or training program may substitute for one (1) year of experience.

Knowledgeable of dimensional tolerances in accordance with the AISC Code of Standard Practice and AWS Structural Welding Codes.

Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure.

High School Diploma or equivalent and at least 3 years of related experience.

Read prints and inspect parts to ensure they are within given tolerances.

Preform daily maintenance and cleaning of all inspection equipment.

Ensure all paperwork is completed as necessary each job.

Ensure that all gages used are within calibration standards.

Apply markings and stickers to all products as needed.

Move parts around as needed from inspection area.

EDUCATION AND EXPERIENCE YOU’LL BRING

an equivalent combination of education and work experience

At Abbott, you can have a good job that can grow into a great career. We offer:

Learn more about our benefits that add real value to your life to help you live fully

Handle discrepant materials per the documented disposition and document activities in the appropriate systems or paperwork.

Performs simple statistical analysis through the collection and input of data into software applications or manual calculations.

Experience: Minimum of 1 year preferred

Math skills for calibrating and calculating specifications

Reports inspection data to lead inspector.

ALL OTHER DUTIES AS ASSIGNED

Minimum Degree Required: High School Diploma or equivalent

Determine if projects meet production standards

Perform Inspections representing the QA Team and the South Florida Water Management District (SFWMD) Client

Confirm testing requirements and assure QA and QC test frequencies are being met

Support Material qualification process – Verify correct materials are used and documented

At least 5 years of experience in construction inspection for earthworks projects is preferred

Some knowledge of construction including material, methods, plans and specifications

Experience in Structures and/or Soil Cement

Experience in RV or related industry inspection

Inspecting and documenting manufacturing defects and codes

Communicate with Team Leaders necessary repairs

Ability to read and communicate well

High School Diploma or General Education Diploma (GED) preferred

Prior manufacturing or packaging experience preferred

Schedule: Monday-Friday with opportunities for overtime

Controls label distribution to packaging lines and handles related computer transactions

Stores new and reconciled labels and inserts in the designated label room location

Performs label reconciliation upon receiving returned labels, including quarantine, hold, or destruction with documentation

Working knowledge and experience in basic computer applications such as Microsoft Word, Excel and Outlook.

Knowledge of SAP and the ability to complete transactions for release

Proficient knowledge of geometrical tolerancing

Effective and clear written and verbal communication skills in English language.

Other duties and responsibilities in the Quality Department as assigned

Preferred 3-5 year of relevant experience in an FDA regulated environment

Bachelors Degree in Aviation Management, Business or related field

As designated and assigned by the Manager Quality Control, accomplish safety and housekeeping checks of hangar and/or line work areas.

Assist the Manager Quality Control in the on-site acceptance checks of additional aircraft to be added to the company's Ops Specs.

3 years maintenance experience on FAR part 121 certificated aircraft of 50 or more passenger aircraft

Knowledge of GMM, Maintenance Programs, and other related company manuals

Experience on Airbus A320 Fleet type aircraft

Location - City, Region or Area

Fair Chance Initiative for Hiring Ordinance

Click here for more information

QC Field Inspector | Guess? Inc. - Corporate Careers

Maintain standards of safety and comply with Company’s Health, Safety and Environment Management System requirements.

Follow and maintain Company standards of Quality in accordance with Company Quality System requirements.

Manage process improvement on project and turnaround

Analyze data and detect problems or trends and manage appropriately

Good communication skills and team player

Have some NDE certifications (RT, PT, ect.)

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

Perform routine and repetitive inspection procedures to ensure quality levels at various stages of production.

Inspect in-process and/or finished production assemblies and sub-assemblies for conformance to quality assurance standards.

Read and follow visual aides, engineering change notices, or established operating procedures, determine acceptance or rejection of product.

Work under close supervision of Manufacturing supervisor or other designated supervisor.

Follow standardized and routine written directions and visual aides for assigned quality assurance inspection operations.