Electronics Engineer Jobs
By Arizona State University At , Tempe, Az $73,370 - $101,200 a year
Experience in basic project management processes.
Familiarity with setup, license management of EDA tools
Experience with the use of EDA tools for chip design
Experience in taping out chips (full chip simulation and validation)
Knowledge of engineering principles and procedures.
Knowledge of design, simulation, and analysis of ICs.
Electrical Engineer (Electronics) Jobs
By Schlumberger At , Sugar Land, Tx
Make presentations effectively to technical and management audiences.
Conduct and/or participate in technical reviews of requirements, specifications, designs, code and other artifacts. Ensure commitments are agreed, reviewed and met.
Implements and complies with all Sarbanes Oxley requirements as defined in the risk control matrix.
4-7 years of relevant experience
Prior experience in analog and/or digital circuit designs, simulation and troubleshooting.
Prior experience with PWA manufacturing processes, inspection and testing.
Electronics Engineer Iv Jobs
By Frontgrade At , Plainview, 11803, Ny $146,900 - $162,400 a year
Minimum of 8 years’ experience in the design and development of electronic products, with at least 2 years as Project Engineer
Strong technical, interpersonal, teamwork, and communication skills
Experience in estimating for the purpose of responding to customer Requests for Quotation
Working knowledge of military standards; MIL-STD-461, MIL-STD-981, MIL-PRF-27, MIL-STD-38534/5, etc.
Competitive Benefits: Medical (FSA + HSA), Dental, and Vision
Specifying, designing and/or evaluating related analog circuits, such as EMI filters, as may be appropriate
Electronics Engineer Jobs
By California Institute of Technology At , Pasadena, 91125, Ca
A Bachelor's degree in Physics or Engineering. In lieu of a Bachelor's degree, we will consider 5 years of equivalent experience.
3+ years overall experience in the field of design of analog electronic systems.
2+ years of experience using software for circuit design, data analysis and simulation.
A thorough knowledge of electronics test equipment including: RF network analyzers, dynamic signal analyzers, oscilloscopes, and common lab test equipment.
Experience in electrical engineering for large scale science projects.
Detailed knowledge of the LIGO interferometer systems.
Design Engineer Jobs
By Centillion Networks At , Atlanta, Ga
Candidates must have prior OSP engineering design experience and should familiar with fiber planning concepts.
The candidate should have strong knowledge on Telecom technologies
Should have hands on experience in AutoCAD and in designing the Fiber and copper network
Should have knowledge on telecom infrastructure such as Point to Point, Point to multipoint and FTTx networks etc.
Knowledge on ISO standards would be an advantage
Familiarity with aerial, buried and underground OSP facilities is imperative.
Electronics/Digital Engineer Jobs
By Caterpillar At , Fort Worth, 76177, Tx
Develops and manages the project/program to the plan.
Supports and advises other engineers, managers, marketing personnel, customers, suppliers, and other process partners.
Self-starter with strong technical leadership skills.
Good spatial and conceptual design skills.
Continuously learning through experience and staying abreast of technology.
Voluntary Benefits (Ex. Accident, Identity Theft Protection)
Power Electronics Engineer Jobs
By ABB At , Plano, Tx
1-3 years of engineering experience, preferably in power electronics or related field.
Must be able to perform electrical characterization per checklists, design validation, and qualification.
Support cost out projects through design and / or testing.
Troubleshoot AC/DC, DC/DC power supplies and DC power systems.
Maintain close contact with customers and Field Application Engineers to identify and resolve issues involving product applications.
Maintain Product Bill of Materials with component updates and issue change notices.
Junior Design Engineer Jobs
By Brask, Inc. At Pearland, TX, United States
Begins to project manage internally alongside Engineering manager to learn the ins and outs of project management at Brask.
Is considered a master at all tasks from the Brask skill set matrix for Junior Design Engineer.
Shows a thorough understanding of basic design knowledge and parts.
Learns Brask Inc.’s mission, core values, services, and operational procedures.
Begins to learn how to properly draft and design single components, with oversight, review and feedback from a Sr. Design Engineer.
Starts to gain a fundamental understanding of how ASME codes and customer specifications
Electronics Engineer Jobs
By AK Aerospace Technology Corporation At , Greenbelt, Md
Experience with Digital design (including FPGA design)
Experience with Analog Design (critical areas such as Analog to Digital Converters, low noise preamp)
Possess strong interpersonal skills, be very adaptable to change and have excellent oral and written communication skills
Experience in operating test equipment’s such as oscilloscope, logic/spectrum analyzers.
Experience in troubleshooting analog and digital circuits.
AKAT Corp is seeking a highly motivated Electronics Engineer to support the NASA/GSFC programs. Specific requirements include:
Design Engineer Ii Jobs
By YETI At , Austin, 78704, Tx
Experience and knowledge of metal component fabrication preferred
Manage multiple projects from ideation to production
Translate marketing requirements to technical performance requirements
B.S. or higher in Mechanical, Manufacturing, or Plastics Engineering, or equivalent work experience
At least 4 years of Design Engineering experience
Experience with plastics manufacturing (injection molding preferred)
Senior Electronics Engineer Jobs
By California Institute of Technology At , Pasadena, 91125, Ca
Master's degree in electrical engineering, physics, and/or computer science with 15+ years related experience.
Deferred charge vs. signal, for serial charge transfer.
Photon transfer curves; infer conversion gains and well capacities.
Read noise in image areas and overscans for short dark frames. (Convert to e-).
Provide future advice or assistance with CCD testing/optimization by mutual agreement.
Expertise in scientific CCD setup, operation, performance characterization and optimization.
Design Engineer, Amazon Logistics
By Amazon.com Services LLC At , Bellevue, Wa From $61,300 a year
Process Engineering skills and Project Management skills
Experience in Lean Management, Six Sigma and other OE tools
Experience to collaborate with design engineering, construction, real estate managers, execution project managers
Knowledge to organize and manage multiple tasks simultaneously
5+ years of experience in Design, Construction, Architecture, or Topography
Experience in designing, implementing, and launching of fulfillment, delivery, sortation centers
Electronics/Software Engineer Jobs
By MIT Lincoln Laboratory At , Lexington, Ma
Some hands-on experience with implementing & testing embedded real-time hardware-software systems for motion control
Excellent written, verbal communication skills and ability to work effectively with other team members
For Benefits Information, click http://hrweb.mit.edu/benefits
Design & develop high-reliability embedded software/hardware systems that control custom hardware and commercial test equipment
Execute tests using software and hardware, develop post-processing scripts to help analyze acquired data and contribute to data analysis
Use of test equipment such as oscilloscopes, waveform generators, spectrum or logic analyzers for software-hardware test & debugging
Layout Design Engineer Jobs
By Micron At , Atlanta, 30345, Ga
A Bachelor's or AS degree with no experience
Excellent problem-solving and analytical skills
Good communication and document skills
Good skill of Microsoft office software
Good knowledge and use of operating Systems: Windows, Mac OS, Unix
Understand the basic CMOS cross-section components
Design Engineer Jobs
By Emerson At , Harlingen, Tx
REQUIRED EDUCATION, EXPERIENCE & SKILLS:
PREFERRED EDUCATION, EXPERIENCE & SKILLS:
Evaluate applicable standards and complete vital applications for certification
Two years of engineering experience
Working experience with AutoCAD, Inventor or CREO
Experience with managing projects and/or product development
Electronics Engineer Jobs
By AZAD Technology Partners At Vancouver, WA, United States
depending on related qualifications and experience, as well as composition of selected compensation package.
plus consultant position with high probability of long term and ongoing continued employment.
position based in Vancouver, Washington with up to 95%
Lead Application Engineer, Automotive Electronics
By Henkel At , Madison Heights, 48071 $100,000 - $130,000 a year
Experience with business strategy, marketing, and account management.
Strong customer facing experience with ability to work with and present to cross functional teams.
Design, plan, and execute laboratory testing to generate technical data reports with resulting communication to key stakeholders both internal and external.
Leads/supports ongoing harmonization and administration of laboratory test methods for global automotive materials platform.
Provide product training for sales, marketing, and technical functions for both internal and external audiences.
Organize and perform customer lab demonstrations using product application equipment (internal and external).
Electronics Engineer Jobs
By US STRATEGIC SYSTEMS PROGRAMS (SSP) At , Littleton $82,830 - $144,034 a year
If you are relying on your education to meet qualification requirements:
Is there a basic education requirement for this position?
You will influence, leads, monitors, and approves contractor design and product/quality assurance efforts in satisfying contractual requirements for various subsystems.
You will be evaluated for this job based on how well you meet the qualifications above.
You will lead efforts related to the Strategic Weapons Systems (SWS) and missile, reentry and guidance subsystems including: aerodynamic structures.
You will lead efforts related to hydraulic controls; propulsion; electronics; test equipment; support equipment; software; and ordnance engineering.
Electronics Engineer Jobs
By US Federal Communications Commission At , Washington, 20002 $132,368 - $183,500 a year
You will be evaluated for this position on the following Knowledge, Skills, Abilities and Other characteristics (KSAOs):
If you are relying on your education to meet qualification requirements:
Land & base management Certain current or former term or temporary federal employees of a land or base management agency.
Certain current or former term or temporary federal employees of a land or base management agency.
Knowledge of engineering concepts, principles and practices of electronics engineering.
Knowledge of conducting engineering studies.
Electronics Design Engineer - Radiation Survivability Engineer
By Jacobs At ,
Management has the prerogative to select at any level for which the position is advertised.
Report directly to the Electronics and Electrical Section Manager as part of group of over 45 other Electronics and Electrical Engineers
Radiation survivability test and analysis experience is strongly desired
Prior experience with electrical schematic entry and printed circuit board layout tools such as Altium Designer
Excellent communication and organizational skills and the ability to work in a team environment
Proof of U.S. Citizenship or US Permanent Residency is a requirement for this position.
Electronics Engineer Jobs
By US Space Systems Command At , Peterson Afb $114,044 - $148,255 a year
Extensive experience in program management, engineering, or a related field.
Previous supervisory experience. Experience in change management, demonstrated leadership in building high performing teams, and balancing competing interests across multiple organizations.
Other qualifications - skills, certifications/licenses, honors, awards, special accomplishments, and job-related training courses
1. Knowledge of laws, principles, policies, and practices of systems acquisition and program management.
Knowledge, Skills and Abilities (KSAs):
If you are relying on your education to meet qualification requirements:
Design Engineer - Electronics
By S&C Electric Company At Alameda, CA, United States
Defining systems-level product qualification testing, life testing and production test requirements
Writing requirement documents, functional specifications, hardware test plans, and design documentation
3+ years’ experience in design of mixed signal circuits (analog and digital) or power electronics
Knowledge of electronic engineering analysis and simulation tools such as PSpice or LTSpice is desirable
Knowledge of schematic and board layout tools such as Allegro, Cadence & ORCAD
Experience with high voltage/high power electronics, design for EMC compliance and mitigation is highly desirable
Electronics Engineer I Jobs
By Safran At , Los Angeles, Ca
Maintaining electronic component inventory- including kitting, quality management in the EE Lab
Assists in electronics component selection and obsolescence management
Manage electronic equipment, Maintain organization of testing facility, equipment, chemicals and other materials.
Support qualification testing and reports
Performs electronics testing to make sure that requirements are met and generate test reports
Support the Electronics Lab (EE Lab) activities
Electronics Design Engineer Jobs
By Soterix Medical At , Woodbridge, 07095, Nj

Base Pay: Commensurate with experience.

Experience: At least 3 years

Electronics Engineer Jobs
By Amentum At , West Palm Beach, Fl
A.S. in related field with 4 years military experienceand training in military sensor systems (Radar, sonar or navigation systems).
Minimum of one year supervisory experience.
Must be able to travel to remote location with limited medical facilities.
West Palm Beach, Florida, United States
Support testing of installed sensor on surface ships, submarines and helicopters.
Prepare equipment and board test vessels as scheduled.
Electronics Engineer Vie F/H
By Safran At , Twinsburg, 44087, Oh

Job description Electronics Engineers in the New Product Development team are in charge of PCB design combining electrical and electronic engineering. The electronic designed in our distribution ...

Electronics Design Engineer Jobs
By The University of Pittsburgh At , Pittsburgh, Pa $41.02 an hour
Strong interpersonal skills and excellent written and verbal communication.
Minimum Years of Experience Required
All Temps - Pennsylvania-Pittsburgh - (23000673)
BS in Electrical Engineering or related field
Electronics Reliability Engineer Jobs
By Itron At , West Union, 29696, Sc
Determine reliability requirements of components and systems to achieve company, customer and any governmental agency reliability objectives.
Evaluate from a reliability standpoint, the materials and techniques used in production.
Pursue failure analysis and corrective action with Itron's component suppliers.
Analyze field returns and drive continuous improvement back to the supplier chain.
Draw conclusions on the top reliability issues and report findings.
Make reliability predictions on new and changed designs.
Electronics Engineer I Jobs
By Voyig At , Paso Robles, Ca
Bachelor's Degree in Electronic Engineering, CPE Bachelors, Masters Degree, or equivalent experience
0-2 years experience in engineering
Knowledge of control systems, servos, PLLs, sensors, communications
Experience developing and debugging algorithms in Python, MATLAB, and/or C
Experience with Schedmatic Capture & PCB layout (Altium software) preferred
Exposure/experience with harsh environment electronic circuit design & application, including high temp (150C+) and high vibration a plus
Design Engineer Jobs
By VHV Company At Winooski, VT, United States
Competencies - Education, Knowledge, Skills and Abilities
Extensive knowledge and experience designing HVAC systems from conception.
Bachelors degree in Mechanical Engineering, Professional Engineering License, or, equivalent skill/knowledge.
Extensive knowledge and experience in the HVAC and Piping trades (10 – 15 years).
VHV offers industry-leading pay. Benefits packages include:
Experience designing clean rooms preferred.
Design Engineer Jobs
By hapco At , Abingdon, 24210, Va

Design Engineer Engineering Virginia Posted 14 hours ago HAPCO – ABINGDON, VA – The Design Engineer will focus on designs specified by each customer, and be proactive in ...

Electronics Control Engineer Jobs
By Underwriters Laboratories Inc. At , Melville, 11747, Ny
Communicates project status and results to clients through frequent contact and by preparing reports. Prepares Follow-Up Service Procedures and information pages.
Integrates continuous improvement concepts and techniques into all aspects of the job.
Resolves engineering issues associated with Variation Notices by analyzing and reporting on the acceptability of the variations.
University Degree in Engineering, Engineering Technology, Industrial Technology, Manufacturing Technology, or Physics from an ABET accredited program.
Av Design Engineer Jobs
By Technology Providers Inc At Gilbert, AZ, United States

The Design Engineer is a front line position for the company that entails all technical facets of proposal generation. Core responsibilities include creating complete technical bid proposals from ...

Design Quality Engineer Jobs
By Tesla At Fremont, CA, United States
Some experience and technical knowledge of different manufacturing processes for appearance parts.
Manage supply base for timing on pre-grain, post-grain, and overall appearance on appearance parts.
Manage Design Quality data (AAR) in supplier portal.
Detail oriented and organized. Can manage data, timelines and tracking and follow through.
Strong communication skills, ability to be firm and flexible at the same time.
Family-building, fertility, adoption and surrogacy benefits

Are you looking for an exciting opportunity to use your engineering skills to design innovative electronics products? We are looking for a talented Electronics Design Engineer to join our team and help us create the next generation of electronics products. You will be responsible for designing, developing, and testing new electronics products from concept to production. If you have a passion for electronics and a creative eye for design, this could be the perfect job for you!

An Electronics Design Engineer is responsible for designing, developing, and testing electronic components, circuits, and systems for a variety of applications. They must be able to analyze and interpret data, and create and maintain detailed technical documentation.

What is Electronics Design Engineer Skills Required?

• Knowledge of electronic components and systems
• Ability to design and develop electronic circuits and systems
• Knowledge of circuit design and analysis
• Knowledge of microprocessors and microcontrollers
• Knowledge of programming languages such as C, C++, and Java
• Ability to troubleshoot and debug electronic systems
• Ability to use CAD software for circuit design
• Ability to read and interpret schematics
• Knowledge of safety regulations and standards

What is Electronics Design Engineer Qualifications?

• Bachelor’s degree in Electrical Engineering, Computer Engineering, or a related field
• Experience in electronics design and development
• Knowledge of circuit design and analysis
• Knowledge of microprocessors and microcontrollers
• Knowledge of programming languages such as C, C++, and Java
• Ability to use CAD software for circuit design

What is Electronics Design Engineer Knowledge?

• Knowledge of electronic components and systems
• Knowledge of circuit design and analysis
• Knowledge of microprocessors and microcontrollers
• Knowledge of programming