Control Valve Technician I Jobs in Lamar, Texas

Major Tasks, Responsibilities and Key Accountabilities

3-5 years’ experience. Typical Training/Experience

Has knowledge and understanding of motor control circuits and control systems

Has experience using overhead cranes, fork lifts, hand tooling

Builds, tests, troubleshoots, repairs and modifies valves, parts, components, and automated valve assemblies.

Tests and documents manual and automated valves.

Demonstrate effective time management skills

Job specific degree and/or certification (preferred)

Basic mechanical aptitude including, but not limited to, basic hand and power tool knowledge

Follows safety and quality procedures

Must be able to read measuring/scaling devices

Cleaning, blasting, and painting valve components

Equivalent military experience/training is acceptable.

2 or more years of electrical background test experience is acceptable.

Perform production line testing, troubleshooting and repair.

Visually inspect all units to be tested (pre-power inspection)

Duties require performing visual inspection on all product lines.

Duties require standard product testing.

Company Paid Benefits: Short Term Disability, Long Term Disability, Life Insurance

UTLX strives to be the Employer of Choice. Our generous benefits package includes:

Disassembles and assemble fittings on tank cars.

Test, rebuild and test valve to reveal possible defects.

Maintain work area in a neat and orderly manner and report potential hazards.

Climbing, ascending, or descending ladders.

Education preferred: high school diploma or GED equivalent.

Minimum 3- 5 years of experience.

Knowledge of EFCO, Uni-Slip, Dexter or any other in-line lapping and grinding machines preferred.

0 to 30% minimum travel requirement.

Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively

Performs all duties as assigned and adheres to TEAM’s Core Values.

HS Diploma or GED required. Specialized skills training/certification may be required.

Major Tasks, Responsibilities and Key Accountabilities

Learns and understands particular technical equipment; attends training and completes certification as required.

Generally 2 - 5 years of experience in area of responsibility.

Provides expertise related to product implementation and continued service.

Provides technical solutions and design implementations for products and services.

Intermediate and/or Depot level component experience

A Demonstrated high-level problem of solving skills working in a team equipment

Experience with Cryogenic Systems; operation, safety and hardware; Pressure Vessels, Tubing, Fittings and Regulators

Experience with CAD systems for review and interpretation of 3-D models

Integration, test, functional verification, and troubleshooting of hydraulic and pneumatically actuated cryogenic valves, systems and components

Assist engineers in reviewing and developing design concepts, tooling, test hardware and providing feedback for improvements

Education preferred: high school diploma or GED equivalent.

Minimum 3- 5 years of experience.

Pressure Relief Valve Manufacturers Training Courses and/or certifications, National Board of Boiler and Pressure Vessel Inspectors training course preferred.

Knowledge of Trevitest, EVT, AVK, or other in-line test equipment preferred.

Solid working knowledge of the ASME and NBIC codes.

0 to 30% minimum travel requirement.

Assists Valve technician as needed

Identify and use basic hand tools

Ability to work effectively in a team environment as well as by self without direct supervision

Candidate must within a 45 min from the shop

At least High School Grad or GED.

Ability to work overtime and holidays as needed and must be available for call outs as required.

Good interpersonal skills for daily interaction with customers and fellow employees.

Operational experience in the oil and gas industry with respect to system operations, prime movers and associated valves.

Strong analytical skills with the ability to troubleshoot and diagnose systemic problems.

Willing to be trained in skills other than the primary skill.

The ideal candidate should have strong skills in the following:

Perform machining and other support operations on individual components of valves, pumps, turbines, and other industrial equipment utilizing various manual machines.

Demonstrate effective time management skills

HS Education or GED Equivalent

1 year of industry experience

Some prior control valve experience

Demonstrated mechanical skills, basic mathematical skills, and ability to use measurement equipment

Basic oral & written communication skills

Experience using ISO 9001 quality management system auditing

Familiarity with quality management tools (control chart, FTA, FMEA, etc.) and MS Office (Word, Excel and PowerPoint).

Practical experience with materials analysis, testing, and chemical analysis equipment.

Extensive data analysis experience such as statistical process control of production data

Experience in defect reduction of high-volume manufacturing products

Conducting and implementing quality control systems for Li-ion battery manufacturing processes.

Ability to demonstrate support the company’s environmental management system.

Four (4) years of experience working on valves.

Strong valve troubleshooting skillset in the field.

Must be able to self-manage and effectively work in a group setting.

Knowledge of principles of lubrication

Ability to manage multiple priorities and projects simultaneously

SAP or Quality Management System experience

Follow and commit to meet Key Performance Indicators (KPI’s) for safety, quality, production, efficiency, and service requirements.

Develop knowledge of processes, equipment, materials, and products.

Six (6) months of experience inspecting and performing quality checks or;

Math skills to include simple addition, subtraction, multiplication, and division

Follow practices and processes intended to provide safe products that comply with appropriate laws and regulations, meet the company quality standards.

Maintains qualification on test methods.

Any other projects or responsibilities assigned by the supervisor.

A High School diploma or general education degree (GED) is required.

0 to 2 years of related relevant work experience is required.

Assists in process monitoring, identifying, and recording any product quality problems.

Measures the parameters of the product interpreting and ensuring conformance to the specification limits.

SAP or Quality Management System experience

Follow and commit to meet Key Performance Indicators (KPI’s) for safety, quality, production, efficiency, and service requirements.

Develop knowledge of processes, equipment, materials and products.

Six (6) months of experience inspecting and performing quality checks or;

Math skills to include simple addition, subtraction, multiplication and division

Follow practices and processes intended to provide safe products that comply with appropriate laws and regulations, meet the company quality standards.

Company Paid Benefits: Short Term Disability, Long Term Disability, Life Insurance

Disassembles and assemble fittings on tank cars.

Test, rebuild and test valve to reveal possible defects.

Maintain work area in a neat and orderly manner and report potential hazards.

Lift up to 50 pounds as needed and perform tasks that require climbing and balancing on ladders and platforms.

Able to pass drug screen and physical.

Organized and effective time management skills

Coordinate with office personnel on repair requirements

The right candidate will the ability to learn our trade and has experience working hand and power tools.

Follow all Pioneer Safety and Quality procedures and regulations

Operate equipment – overhead hoists, sand blaster, parts washer, propylene torch, etc.

Disassemble valve without damaging parts per the manufacturer’s Installation & Operation Manual

Company Paid Benefits: Short Term Disability, Long Term Disability, Life Insurance

UTLX strives to be the Employer of Choice. Our generous benefits package includes:

Disassembles and assemble fittings on tank cars.

Test, rebuild and test valve to reveal possible defects.

Maintain work area in a neat and orderly manner and report potential hazards.

Climbing, ascending, or descending ladders.

Experience using ISO 9001 quality management system auditing

Familiarity with quality management tools (control chart, FTA, FMEA, etc.) and MS Office (Word, Excel and PowerPoint).

Practical experience with materials analysis, testing, and chemical analysis equipment.

Extensive data analysis experience such as statistical process control of production data

Experience in defect reduction of high-volume manufacturing products

Conducting and implementing quality control systems for Li-ion battery manufacturing processes.

Company Paid Benefits: Short Term Disability, Long Term Disability, Life Insurance

Disassembles and assemble fittings on tank cars.

Test, rebuild and test valve to reveal possible defects.

Maintain work area in a neat and orderly manner and report potential hazards.

Lift up to 50 pounds as needed and perform tasks that require climbing and balancing on ladders and platforms.

Able to pass drug screen and physical.

Ability to demonstrate support the company’s environmental management system

Four (4) years of experience working on valves.

Strong valve troubleshooting skillset in the field.

Must be able to self-manage and effectively work in a group setting.

Knowledge of principles of lubrication

Ability to manage multiple priorities and projects simultaneously

In depth knowledge of Laboratory Data Management System (LDMS) preferred

Effective time management and organizational skills needed

Perform water treatment duties as described by the Quality Manager where applicable

Perform Internal Clean in Place (CIP) setup as described by the Quality Manager where applicable

Effective attention to detail, analytical, multi-tasking, and problem-solving skills

Effective interpersonal, oral, and written communication skills

1. High school graduation or other equivalent (i.e., General Educational Development (GED), foreign equivalency, etc.).

IRRIGATION CONTROL TECHNICIAN I - SUSTAINABILITY SVCS

Document(s) Required at Time of Application

2. Copy of current driving history (dated within six (6) months from the date printed)

It is the applicant's responsibility to upload

required documents as listed in the job description.

May assist with shop assembly needs, shipping and receiving, and inventory management needs.

Work closely with Outage Manager(s) and Routine Repair Coordinator(s) assigned to support the area.

2+ years experience as a field service technician, instrumentation technician, and/or demonstration of general electrical/mechanical competency.

A working knowledge of process controls.

Strong knowledge of valve actuators

Verbal and written skills to effectively communicate.

Basic knowledge in current Business Management Systems and help in entering employee job time as needed

Must possess a general working knowledge of hand, power, and pneumatic tools.

Must have basic problem solving skills.

Must have basic math skills.

Must have basic computer skills.

Five (5) plus years’ experience as a Valve Tech in the oil & natural gas industry or oil & gas exploration

Under minimal supervision performs all responsibilities as a multi-skilled individual in an empowered work team.

Maintains qualification on test methods. Performs package inspection for quality specifications.

Any other projects or responsibilities assigned by supervisor.

Assists in process monitoring, identifying and recording any product quality problems.

Measures the parameters of the product interpreting, and ensuring conformance to the specification limits.

Performs audits of process and finished goods. Communicate all deviations.

Excellent communication, time management and organizational skills

Courteous interaction and communication with inside and outside sales, management and warehouse personnel

Acting as Production Manager responsible for assembly of all automated packages.

3 to 5 years experience is preferred but not required

Knowledge of shipping, receiving and inventory control

Follow all proper procedures for set up, use and maintenance of tools and equipment in the Automation center.

Do you have a valid California Class C or higher driver license?

Electrical & Control Technician I/II/III

Electrical & Control Technician I

Electrical & Control Technician II

Electrical & Control Technician III

All applicants must complete a Kern County Water Agency application.