Register
Recruit Create CV

2Nd Shift Welder Jobs

Tig Welder – 2Nd Shift
By SpaceX At Hawthorne, CA, United States
Knowledge and experience completing welds that pass visual before being X-rayed or dye penned
2+ years of experience with TIG welding
Experience with aerospace TIG welding
Certification with AWS D17.1 and D1.2
Experience with overhead cranes and forklifts
Weld, assemble, and fabricate various fluid systems and various sub-assembly components
Welder - 2Nd Shift
By Eaton At , Troy $21.98 an hour

Must be able to work in the United States without corporate sponsorship now and within the future

In this function you will:

Mig Welder - Weekend Shift
By Donaldson At , Baldwin $25.49 an hour
A combination of weld education and experience.
Six months industrial weld experience, or
Fit and position product weldments having several parts, using welding and welding fixtures and jigs where applicable.
Work from prints and routings.
Statistical process control (SPC) data collection and use of graphs (TIG welding).
Complies with all DOT, HAZMAT and environmental policies and procedures.
Welder (Union, 2Nd Shift) - Atchison Ks
By Bradken At , Atchison, 66002 $23.32 - $26.59 an hour
100 years of knowledge and experience behind us, endless opportunities ahead.
Good written and verbal communication skills
1-2 years welding experience preferred
Knowledge of and ability to operate various grinders electric and pneumatic preferred
Employee Training and Education Reimbursement opportunities
Ability to work with limited direct supervision
Welder - 1St Shift
By XPO At , Searcy, 72143
May perform other duties as assigned by management
Meet production requirements and standards
2 years of welding and fabrication experience
Perform all welding activities and operate all welding equipment and tooling in a safe manner
Verify welding results through inspections and weld tests, if necessary
Fabricate components by using equipment to clean, cut, burn and weld pieces
Welder - 2Nd Shift
By XPO At , Searcy, 72143
May perform other duties as assigned by management
Meet production requirements and standards
2 years of welding and fabrication experience
Perform all welding activities and operate all welding equipment and tooling in a safe manner
Verify welding results through inspections and weld tests, if necessary
Fabricate components by using equipment to clean, cut, burn and weld pieces
Welder - 2Nd Shift
By Regal Rexnord At , Cambridge
Accuracy with alignment, dimensions, materials, number of components, and general inspection requirements of metal chain drive belts.
Basic computer skills are needed for reviewing and performing shop orders
Tuition reimbursement and continuing education allowance
Medical Benefits: We provide some of the most competitive benefits in the industry.
Initial training is 90 days on day shift (5:00 am – 3:30pm / Mon – Thurs.).
Tig welding 90% and mig welding 10% using multiple types of materials (steel, galvanized, and a range of stainless
Production Welder - 2Nd Shift
By Eaton At , Waukesha $22.30 - $27.23 an hour
Minimum of 1 year of manufacturing experience AND/OR completion of a Welding certification from an accredited institution.
Bonuses are being offered for a limited time only. Applications must be submitted on or after January 24th, 2023 to qualify.
Health benefits and vacation time (2 weeks to start) are available to use on day one!
Retirement benefits - up to a 6% match
Educational Assistance Program, Wellness Reimbursement, and more!
Bonuses are only applicable to specific job types and shifts; additional terms and conditions may apply.
Mig/Tig Welder - Metering 2Nd Shift
By Eaton At , Sherman $20.38 - $22.70 an hour
Solid math skills; analytical and reasoning skills.
Working knowledge of weld operations, including MIG, TIG of stainless steel and/or aluminum
Set up, understand and proficiently operate all welding equipment.
Troubleshoot various and appropriate machine problems.
ID and tag shop orders with product. Retrieve/enter data into system.
Ensure quality and proper documentation on all parts.
General Welder - 2Nd Shift (Transformers)
By Eaton At , Waukesha $24.50 - $32.75 an hour
Bonuses are being offered for a limited time only. Applications must be submitted on or after January 24th, 2023 to qualify.
Health benefits and vacation time (2 weeks to start) are available to use on day one!
Retirement benefits - up to a 6% match
Educational Assistance Program, Wellness Reimbursement, and more!
Minimum of One (1) year of assembly experience.
Bonuses are only applicable to specific job types and shifts; additional terms and conditions may apply.
Welder/Entry Level (2Nd Shift)
By GE Gas Power At , Richmond, 23237 $21.00 - $25.50 an hour
Accomplished skills in a trade with experience on Power Generating Equipment
Starting pay is from $21-$25.50, based on experience
Ability and willingness to perform the physical requirements of the position with or without reasonable accommodations
Ability to focus on multiple projects and priorities at one time, manage time effectively, and allocate resources efficiently
Interpret blueprints, specifications, diagrams, or schematics to determine appropriate welding processes;
Inspect completed welds to determine structural soundness.
Welder 1- 3Rd Shift
By Caterpillar At , Sanford $22.76 an hour
Must have some welding operation experience.
Microsoft office applications experience (Word, Excel and PowerPoint)
3rd shift: $22.76/hour (includes 8% shift premium) up to $23.81/hour with attendance premium applied
Inspecting own work including quality checks utilizing weld and attribute gauges and other measuring tools.
Performing in station repair on defective welds utilizing carbon air arc process, grinders, etc.
Clearing common robotic welding system faults
Welder/Fitter- 1St Shift
By Pegasus Steel At , Charleston $26.50 an hour
Receives instructions, prints, and work orders for the job. Plans details of working procedure and tools and material requirements.
Minimum of three years welding experience.
Must have knowledge of the metric system.
NAVSEA experience is a plus.
Fitting experience is a plus.
Additional increases for alloy certifications.
Welder Knc - 3Rd Shift
By Crown Equipment Corporation At , Kinston, 28504
Candidate should possess proficient weld skills
Inspect parts per print specifications
Set up and adjust welder and fixtures
Use a carbon arc air gouging and cutting process for rework
Use had grinders to fit parts as needed
Rotate to one of 16 various weld stations
Mig Welder- 1St Shift
By Eaton At , Omaha, 68107, Ne $20.50 an hour
6 months MIG welding experience required
Read and interpret drawings, sketches, and engineering drawings including weld symbols, tolerances, and quantities
Set equipment and welds parts using MIG equipment.
Set up and use cutting torches and all types of clamps and jigs associated with welding.
Use grinders and associated de-burring equipment.
Utilize calipers, gauges, or other measuring devices to assure engineering standards to the .001 precision level
Welder - 1St And 2Nd Shift
By Lockheed Martin At , Fort Worth, 76108, Tx

Other Important Information You Should Know

Welder - 1St Shift
By WEG Electric Corp At , Minneapolis, 55413, Mn
Based on experience and qualifications
Works in other areas of the Fabrication Team skills matrix, may work in other areas fabricating parts and brazing.
1-2 year welding degree or High School degree with a minimum of 3 years relevant welding experience.
Knowledge of layouts, ability to read blueprints, perform basic math and calculate conversions.
Set up and fabricate a wide variety of components using various welding processes, primarily FCAW and GMAW.
Use oxygen-acetylene, oxygen-natural gas, plasma arc and carbon-arc equipment to heat, straighten, trim and bevel ferrous and non-ferrous material.
Welder - 1St And 2Nd Shift Opportunities
By ATACO STEEL PRODUCTS CORPORATION At , Cedarburg, 53012, Wi $21 an hour
Over one year of welding experience in a manufacturing environment
Manufacture and fabricate finished metal products
Fit, align, weld, and fabricate large, heavy structures, weldments, components, and assemblies
Utilize jigs and holding fixtures, when available, to locate and position materials
Install and repair various equipment and components
Follow blueprints to meet product specifications
Welder 1St Shift Jobs
By Ariens Company At , Fayetteville, Tn $21 an hour
Pass appropriate internal welding certification
Working knowledge of Blue Print reading and weld symbols
Remove and install rolls of weld wire and make equipment adjustments necessary to properly weld
Interpret Blue print and weld symbols to produce welds to print specification
Use proper welding technique and adjust equipment as necessary to produce quality weld problems
Prepare parts necessary for welding
Tig Welder - Weekend Shift ($24 - $32/Hr + Shift Premium)
By Aerospace Welding Minneapolis, Inc At , Eagan, 55121, Mn $24 - $32 an hour
Offer viable semi-annual process improvement initiatives
Successful completion of accredited welding course or equivalent on the job training and 5-10 years high level TIG welding experience
Ability to stand or sit for prolonged periods of time while performing job duties
Entry Level to Senior Level Experience!
The proper fabrication and welding of customer parts and assemblies as requested
High Variety, low volume part work

Are you looking for a challenging and rewarding welding job? We have an opening for a 2nd Shift Welder at our company. You will be responsible for welding components in flat, vertical, or overhead positions. You will also be required to inspect and test welds to ensure quality. If you have experience in welding and are looking for a great opportunity, then this is the job for you!

Overview:

A 2nd Shift Welder is responsible for welding and fabricating metal components in a production environment. They must be able to read and interpret blueprints and drawings, as well as use a variety of welding tools and equipment. They must also be able to work independently and as part of a team.

Detailed Job Description:

The 2nd Shift Welder is responsible for welding and fabricating metal components in a production environment. This includes reading and interpreting blueprints and drawings, as well as using a variety of welding tools and equipment. The Welder must be able to work independently and as part of a team. They must also be able to follow safety protocols and ensure that all welding and fabrication is done in accordance with industry standards.

What is 2Nd Shift Welder Job Skills Required?

• Knowledge of welding and fabrication techniques
• Ability to read and interpret blueprints and drawings
• Ability to use a variety of welding tools and equipment
• Ability to work independently and as part of a team
• Knowledge of safety protocols
• Attention to detail

What is 2Nd Shift Welder Job Qualifications?

• High school diploma or equivalent
• Previous welding and fabrication experience
• Certification in welding and fabrication

What is 2Nd Shift Welder Job Knowledge?

• Knowledge of welding and fabrication techniques
• Knowledge of safety protocols
• Knowledge of blueprints and drawings

What is 2Nd Shift Welder Job Experience?

• Previous welding and fabrication experience

What is 2Nd Shift Welder Job Responsibilities?

• Read and interpret blueprints and drawings
• Use a variety of welding tools and equipment
• Weld and fabricate metal components
• Follow safety protocols
• Ensure that all welding and fabrication is done in accordance with industry standards
• Work independently and as part of a team