Quality Inspections Jobs

What you’ll do:

KEY ACCOUNTABILITIES:

 Select appropriate measuring instruments and measurement techniques for the job at hand.
 Set-up and inspect component parts to the appropriate drawings, process sheets, and inspection instructions.
 Document inspection results in accordance with the appropriate Quality Assurance Procedure.
 Perform and document results of first article inspections, FAA conformity inspections and expanded inspections on required programs.
 Utilize and operate all measuring equipment and instruments located within the machine shop and inspection locations.
 Perform and document results of the pre-shipment inspection of final assemblies and loose parts prior to shipment.
 Ability to read and complete inspection ledger, inspection check sheet, operation sheet, move ticket and discrepancy report (DR) and other paperwork as necessary to comply with Quality Systems.
 Responsible for notifying supervisors when work received does not meet the specifications required by previous operators including paperwork requirements as observable.
 Performs operator defined TPM and/or 5S tasks as required.
 Responsible for returning all tools to their proper location at the end of the shift and cleaning work area.
 Proper use of all tools and gages necessary to complete and to verify that all work performed has been completed to specifications as required.
 Compliance to Manufacturing Self-Release Process (MSRP), and responsible for the quality of the product going to next operation.
 Perform other duties as required with the job classification.

POSITION CRITERIA:

 Team player attitude demonstrated in boss and peer relationships
 Strong work ethic demonstrated through action orientation and a drive to achieve results
 Ability to articulate technical information in an actionable format in both verbal and written form
 Flexibility, ability to multitask, and proficiency in shifting priorities
 Strong shop math skills
 Basic knowledge of component parts
 Demonstrated ability to read and interpret engineering drawings and applicable specifications
 Ability to read and complete inspection ledgers
 Demonstrated ability to select and use measuring equipment
 Concern for quality improvement
 Concern for job safety

Qualifications:

PREFERRED QUALIFICATIONS:

 Prior work experience using inspection techniques
 Prior work experience using basic table layout techniques including, but not limited to, true position, perpendicularity, runout, and parallelism

BASIC QUALIFICATIONS:

 High school diploma or GED required
 Minimum of 3 years prior work experience in a manufacturing or military environment performing machining, assembly, test, or inspection work required. An Associates Degree in a technical field such as drafting, designing, industrial production, or manufacturing engineering technology may be substituted for work experience.
 This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee
 No relocation benefits are being offered for this position. Only candidates residing within
100 miles of Eaton’s Jackson, MS facility will be considered for this position

Skills: