Production Assembler 2 Jobs

Replacing Req: MEGJP00001430
Job Title: Electrical Assembler II (PMA )
Pay Rate: $20/hr
Job Designation
The Temporary Electrical Assembler II, under moderate guidance, will perform processes to manufacture a finished product, using small hand tools and soldering skills per manufacturing instructions in the cell, in accordance with company policy and safety procedures. May assist in training Assembler I associates.
Job Core Responsibilities

• Performs advanced installation,
• Conducts inspections of own and /or other associates work to insure correctness in accordance with company and /or customer drawing
• May use coating equipment.
• Shapes, connects and installs coils, solder, braze and fuse connections.
• May clean and mark surfaces to indicate measurements.
• May solder and assemble, electro-mechanical or mechanical assemblies/subassemblies using blueprints, wiring diagrams and manufacturing instructions to conform to quality specifications
• Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary.
• Performs advanced test functions.
• Prepares lead wires,
• May use microscope.
• Performs a variety of routine mechanical and/or electromechanical assembly operations in accordance with company instructions and procedures
• Actively demonstrates all safety policies and procedures
• May solder connections and electronic components to circuit boards
• May read calipers.
• Other responsibilities as assigned
• May use small hand and electric tools.
• Performs marking and cleaning process,
• Ability to be trained to use simple machines such as lathes, drill press and balance machines.

Job Specifications
Education: A Secondary Certificate/High School Diploma or equivalent combination of relevant education and work experience that will allow successful performance of job expectations is preferred.
Years Experience: 2-5 years of relevant experience
Skills

• Skilled at routine mechanical and/or electromechanical assembly operations
• Must have good eye/hand coordination
• Effective oral,written and interpersonal skills
• Ability to clearly communicate with all internal and external customer
• Able to operate a variety of hand tools and machinery
• Capable of recognizing and solving typical problems that can occur in own work area; evaluates and selects solutions from established options
• Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedures
• Good manual dexterity required to work with small parts

PHYSICAL ABILITY: (requirements necessary to accomplish the essential functions of the job.)
(0%=NEVER; 1-10%=Rarely; 11-35%=Occasionally; 36-65%=Frequently; 66-100%=Continuously)

• This position may require a pre-employment and annual eye exam
• Power grip Occasionally to Frequently depending to Cell
• Requires ability to lift up to 20-30 lbs.-Frequently
• Walking-Occasionally to continuously depending on cell
• Standing at a workstation for long periods of time-Frequently to continuously depending on cell
• Squatting (bending at the knees to lower body) to pick up or work on part on or close to floor)-Rarely to Frequently depending on cell
• Good manual dexterity required to be able to work with small parts-Continuously
• Reaching above the shoulder-Rarely
• Sitting-Rarely to Occasionally depending on cell
• Fine manipulation (load parts into machine)-Rarely to Frequently depending on Cell
• Carrying (while walking to hold or rest weight directly on hands, arms, or shoulder)-Occasionally
• Bending (forward motion of the upper body from the waist to pick up or work on parts close to the floor)-Rarely to occasionally depending on cell
• Lifting above shoulder level up to 15 lbs.-Rarely
• Good vision required-Continuously
• Reaching below the shoulder (to reach for parts/equipment-Continuously
• Sitting-Rarely to Frequently depending on cell
• Use of hands-Continuously
• Light physical effort normally 10-20 lbs. -Continuously
• Pushing (to exert force on or against an object to move about)-Occasionally
• Climbing-Rarely

Working Conditions
(Rating: 0-2; 0=Never: 1=Rarely: 2=Continuously)

• May be exposed to noise level loud enough to prohibit normal conversation. 1
• May be exposed to dust, gas, fumes, or chemicals. 2
• May be required to wear safety shoes. 0
• May be required to wear hearing protection 1
• Continuous hand motion. 2
• Working with or around equipment and/or machinery. 2
• Protective safety glasses are provided and must be worn in production area as marked. 2
• Safe & healthy manufacturing environment.
• May be required to wear respirator, gloves or protective clothing. 2

This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
Additional Info
Location :