Electro Mechanical Field Technician Jobs in Bell, Texas

Facilitate continuous improvement activities through broad system knowledge and site-specific enhancements

Required: High school diploma with at 1-2 years experience in relevant electrical and/or mechanical role

Experience in relevant electrical and/mechanical role

Experience maintaining material handling systems in a light industry or distribution center environment strong preferred

Strong electrical (3-Phase, 480V, DC and 24V controls) and mechanical skills

Knowledge of wiring diagrams and electrical measuring

Do you have an electrical certification, maintenance manufacturing experience, technical school training, or welding experience?

Using your extensive knowledge to assist entry-level mechanics with difficult repairs

Responsibilities include troubleshooting, repairing, and installing:

Here are important key characteristics our managers look for in potential candidates:

Please be sure that you meet the following minimum requirements for this position:

Deep understanding of high-voltage wiring (480V 3-phase motors)

1-2 years of soldering experience

Experience working with pneumatic equipment

Skills typically acquired through 6 months to 1 year working in a technician training capacity.

Contract Length: 6 months with the high possibility of extension based on performance and other factors.

Monday - Friday |7:00 am - 5:00 pm

Typically has demonstrated skills in more than one process or analytical procedure.

Skills typically acquired through 2-3 years working in a technician capacity or through formal training equivalent to an associate’s degree.

Independently solves routine and some moderately complex problems using pre-established guidelines and plans and carries out moderately complex analytical processes.

Works under general to occasional supervision over work product or procedure with continued direct supervision over new tasks or processes.

May perform a whole test routine or process.

May assist in recommending design or modification of analytical processes, equipment, or procedures.

A technical high school certification program (eg. BOCES) and 9 years relevant work experience or;

a technical high school certification program (eg. BOCES) and 9 years relevant work experience or;

A BS degree in a technical field and 4 years work experience or;

10 years relevant work experience

Relevant work experience should include calibration, maintenance and repair of complex electronic and mechanical control systems

Experience in the field of pressure, temperature, level and flow instrumentation, and Programmable Logic Controller (PLC) based control systems

Create and close work orders into asset management system with appropriate data to include labor hours, equipment maintenance, and parts used.

High School diploma or equivalent required. Typically, an associate degree or vocational technical training is preferred. Specialized skill training/certification preferred.

Proven experience in area of responsibility and successful demonstration of position and key responsibilities as presented above.

or required, offers for such roles are contingent on the candidate

Repair and maintenance of Material Handling Equipment ( MHE ) including belt tracking, component a djustment/replacement, component lubrication, etc.

Complete preventative maintenance routines, documentation, and procedures.

Compliance experience with ESD, Security, Occupational, Health, and Environmental safety requirements

Minimum 5 years of related technical experience in electrical/electronics, electro-mechanical, or industrial maintenance

Associates degree in electrical/electronics, electro-mechanical, or industrial maintenance preferred, or relevant experience

Experience with component repair and motor and sensor uninstall and reinstall

Extensive knowledge of manufacturing processes and PLC ladder logic

Experience working with the necessary documentation and computer programs

Job Duties & Responsibilities :

Entry level positions, intermediate experience positions, and senior experience; works under direct supervision.

For Entry Level Positions : Skills typically acquired through 6 months to 1 year working in a technician training capacity.

Interprets wiring schematics to perform assembly procedures on Wireline tools

Operates in an environment where low and high voltage systems are present

Performs moderate to complex soldering methods

2+ years Assembly and/or manufacturing experience

Extensive experience point to point wiring based off schematics preferred.

High School Diploma or GED

Ability to understand and follow instructions

Maintain a clean & safe environment

Perform a wide variety of complex electrical assembly operations utilizing blueprints, schematics, technical manuals and other specifications.

Typically has demonstrated skills in more than one process or analytical procedure

Independently solves routine and some moderately complex problems using pre-established guidelines and plans and carries out moderately complex analytical processes

Works under general to occasional supervision over work product or procedure with continued direct supervision over new tasks or processes

May perform a whole test routine or process

May assist in recommending design or modification of analytical processes, equipment, or procedures

14524 Heathrow Forrest Pkwy, Houston, Texas, 77032, United States

Typically has demonstrated skills in more than one process or analytical procedure.

Skills typically acquired through 2-3 years working in a technician capacity or through formal training equivalent to an associate’s degree.

Independently solves routine and some moderately complex problems using pre-established guidelines and plans and carries out moderately complex analytical processes.

Works under general to occasional supervision over work product or procedure with continued direct supervision over new tasks or processes.

May perform a whole test routine or process.

May assist in recommending design or modification of analytical processes, equipment, or procedures.

Work independently under limited supervision (self-management)

Experience with product manuals (e.g., reading and applying knowledge to make repairs).

Pass technical assessment addressing job-critical maintenance knowledge areas

Experience with basic electrical systems (e.g., starters, fuses, contacts, relays)

Experience with electrical systems (installation, frequency drive, troubleshooting)

Experience with schematics (e.g., electrical blueprints with switches, starters, maps, relays).

Graduation from a two-year technical school or its equivalent and a minimum of two years of experience.

This position requires strong interpersonal skills and a desire to work as part of a team in a fast-paced environment.

Must have good “hands-on” skills, attention to detail, and the ability to work with minimum supervision.

Candidate must possess good written and verbal communication skills.

Experience with cable fabrication utilizing MIL style, as well as RF connectors.

Soldering skills to include wiring, PCB, SMT.

Compliance experience with ESD, Security, Occupational, Health, and Environmental safety requirements

Conduct analysis of faults and use knowledge for preventive maintenance frequencies to increase uptime and performing corrections as needed.

Minimum 5 years of related technical experience in electrical/electronics, electro-mechanical, or industrial maintenance.

Experience working with the necessary documentation and computer programs.

Mechanical and metal fabrication experience is a plus

Provide uninterrupted operation of production support equipment on the Thermal dispense robots, pneumatic screwdrivers, leakage testers and other support equipment.

Create and close work orders into asset management system with appropriate data to include labor hours, equipment maintenance, and parts used.

High School diploma or equivalent required. Typically, an Associate’s degree or vocational technical training preferred. Specialized skill training/certification preferred.

Demonstrates a senior-level knowledge of 5-7 years of experience in a technical or specialty area.

Proven experience in area of responsibility and successful demonstration of position and key tasks as presented above.

or required, offers for such roles are contingent on the candidate

Repair and maintenance of Material Handling Equipment (MHE) including belt tracking, component adjustment/replacement, component lubrication, etc.

Graduation from a two year technical school or its equivalent and a minimum of five years of experience.

Desired experience using test equipment such as RF network analyzer, spectrum analyzer, and RF power meters

This position requires strong interpersonal skills and a desire to work as part of a team in a fast-paced environment.

Must have good “hands-on” skills, attention to detail and ability to work independently.

Candidate must possess good written and verbal communication skill.

For Benefits Information, click http://hrweb.mit.edu/benefits

Permanent /Direct Hire Position, great company, excellent pay and benefits

On-site position and not Remote

Basic Electrical skills and LOTO

Two to four years work experience in industrial environments where mechanical aptitude is required.

Speaks clearly; listens and gets clarification; demonstrates group presentation skills; participates in meetings.

Possesses basic computer skills and is able to accurately record/document detailed information regarding work performed in our work order database.

Typically has demonstrated skills in more than one process or analytical procedure

Skills typically acquired through 2-3 years working in a technician capacity or through formal training equivalent to an associate’s degree

Independently solves routine and some moderately complex problems using pre-established guidelines and plans and carries out moderately complex analytical processes

Works under general to occasional supervision over work product or procedure with continued direct supervision over new tasks or processes

May perform a whole test routine or process

May assist in recommending design or modification of analytical processes, equipment, or procedures

Typically has demonstrated skills in more than one process or analytical procedure.

Skills typically acquired through 2-3 years working in a technician capacity or through formal training equivalent to an associate’s degree.

Independently solves routine and some moderately complex problems using pre-established guidelines and plans and carries out moderately complex analytical processes.

Works under general to occasional supervision over work product or procedure with continued direct supervision over new tasks or processes.

May perform a whole test routine or process.

May assist in recommending design or modification of analytical processes, equipment, or procedures.

Printpack offers a competitive benefits package including:

Communicate actions taken to repair the machine to operator and/or manager

Demonstrate knowledge of plant and process safety rules, safe operating

Previous experience in a manufacturing environment is required

Nice blend of mechanical and electrical experience

Experience working with single phase / 3 phase motors