Welder Iii Jobs
By Oceaneering At , Chesapeake
Knowledge and practical skills tests required.
Deep Submergence Systems (SOC MCD A, B, and C), SUBSAFE Qualification. Automated welding processes.
Read and understand terminology, blueprints, drawings and schematics to plan installation, modification or repair prior to commencing the process.
Fabricate and install fixtures, jigs, supports and targets to ensure proper alignment during welding processes.
Must have the ability to obtain government base access.
Qualify as a Welder/Workmanship Inspector in accordance with OII Process Instructions and welding procedures.
Welder - Victorville Jobs
By Southwest Gas At , Victorville, 92395, Ca $29.79 - $36.52 an hour
Maintain knowledge of Non-Destructive Testing (NDT) processes and requirements.
Perform labor and skilled mechanical work related to installation, maintenance and operation of natural gas facilities
Successfully complete on-going extensive operator qualification training, and maintain required proficiencies
Work under the direction of a crew leader, independently or with others as required
Ability to quickly analyze and make critical decisions related to the installation or maintenance of subsurface and above-ground facilities by contractor
Provide situational-specific work direction during emergency response or SWG TAP applications
Welder Largo Jobs
By Johnson Controls At , Largo
Welding Certification preferred and three years machine shop experience.
Must be willing to accept and receive frequent supervision and assistance with regard to responsibilities
WORKING CONDITIONS AND PHYSICAL REQUIREMENTS:
Entry level position working under close supervision.
Uses Arc welder and electrode rods to perform tack and bead welds.
Selects proper electrodes and holders, regulates current and time.
Welder Jobs
By E.A.B. Fabrication At , Quincy, 49082 $20 an hour
Great benefits include medical, paid vacation, paid holidays, PTO, and opportunities for overtime!
MIG Welding experience required (pass a weld test)
Starting rate $20/hour and up to $26/hour
Email your resume to [email protected]
OR apply in person at:
Welder Cva Jobs
By NiSource At , Fredericksburg, 22406
Must be able to obtain basic skills in using Work Management System.
Using PC and/or hand held device, completes Job Orders, enters data into Work Management System.
Individual should have basic math, reading and writing skills to safely perform all aspects of the position.
All applicants must be able to become OQ qualified and maintain OQ qualifications.
Performs electric and oxy-acetylene welding to construct, repair, and maintain pipeline and associated facilities.
Performs welding related to construction of new facilities; studies prints, layout materials, interpret codes and regulations.
Product Welder Jobs
By Webster Industries At , Tiffin, 44883 $14.74 - $20.26 an hour
Welds or tack welds metal parts together, using spot welding gun or hand, electric, or gas welding equipment.
Connects hoses from torch to tanks of oxygen and fuel gas, and turns valves to release mixture.
Ignites torch and regulates flow of gas and air to obtain desired temperature, size, and color of flame.
Preheats work pieces preparatory to welding or bending, using torch.
Fills cavities or corrects malformation in lead parts and hammers out bulges & bends in metal work pieces.
Examines work piece for defects and measures work piece with straightedge or template to ensure conformance with specifications.
Welder (Nr89376673) Jobs
By Qualified Staffing At , Marysville, Mi
Do you have at least one-year experience?
middot; Minimum of five (5) years of welding experience.
middot; Knowledge of Tig; Mig; Gas and use of a cutting torch.
middot; A level of mathematical knowledge associated with the normal position of welder.
The general purpose is to weld and fabricate in the Craft Tech building of special machines.
middot; Weld on plant floor of standard products.
Welder A Jobs
By Valmont Industries At , Birmingham, 35221, Al

We are the modern workforce

Welder Jobs
By GEA Group At , Hudson, 54016, Wi $50,000 - $58,000 a year
Must have good blueprint reading skills.
ESSENTIAL DUTIES AND RESPONSIBILITIES include but are not limited to the following:
Marks, cuts, fits, clamps and tack welds parts, to secure proper position per technical drawings.
Produces a weldment from numerous components to a completed product.
Safely operates a variety of hoisting and rigging equipment.
Operates MIG, TIG and GMAW machines as well as plasma cutting torches.
Welder - 687012 Jobs
By Mancan At Warren, OH, United States

Welder Looking for a Career? A place with Good Benefits and a set schedule? Mancan has just that!! We are looking for a Welder in the Warren area for a 1st shift position. One shift from 6:00 a.m. to ...

Welding/Materials Engineer- Quonset Shipyard/ Construction Support
By General Dynamics Electric Boat At , Groton, 06340, Ct
Supporting upper management performance tracking goals by maintaining D341 cognizant data inputs and reports
In-depth knowledge and hands-on experience working with all major welding processes
Knowledge/experience in robotics and lasers, as related to materials joining and welding
2 years of experience working as a welding engineer
Experience in an industrial welding environment, shipbuilding, or other heavy fabrication
Advanced computer skills including use of Microsoft Word, Excel, Access, Project, and PowerPoint (or equivalent)
Welder Jobs
By Enprotech, LLC At , Lansing, Mi $22 - $28 an hour
Have 2-5 years of ,stick, tig and mig welding experience in a manufacturing environment
A generous paid time off program in which the benefits increase along with your tenure with the company
Welds metal parts together, using both gas welding or brazing and any combination of arc welding processes.
Ability to use industry standards for proper equipment setup and efficient use.
Performs related tasks, such as thermal cutting and grinding.
Repairs broken or cracked parts, fills holes, and weld overlay metal parts.
Welder Jobs
By Aecon Group At , Jackson, 29831, Sc
High school diploma or equivalent experience is required
Collaborates with coworkers and has strong interpersonal skills
Learns quickly and has strong math, problem solving and critical thinking skills
Maintains a safe and clean work environment
Follows all safety and quality program expectations
Loads and unloads equipment and materials
Welder Jobs
By ShiftPixy Staffing At , Miami, 33101, Fl $21 - $23 an hour

Position Description: To perform this work successfully, one must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill ...

Welder Trainee Jobs
By Taylor Machine Works, Inc At , Louisville, Ms
Welders will fit, weld, and clean certain production parts that have been chosen by management for this training.
Welders that show an advanced skill set will have the opportunity to advance through the training at a quicker pace.
Previous welding experience and/or 6 months prior training.
Welders will receive instruction on how to keep a clean and orderly workstation that will help them be highly productive.
Welders will perform fillet welds (single and multi-pass), groove welds, oxyfuel cutting, and blueprint reading daily.
The fitter test will include reading a blueprint to fit, oxyfuel cut holes, and weld a predesigned test piece.
Welder - Mig Jobs
By ATW/Big Tex Trailers At , Batavia, 45103, Oh
Must have basic math skills such as adding, subtracting, multiplying, and dividing for calculating material fabrication.
Perform work in a professional and safe manner, report unsafe work practices.
Capable of learning and understanding layout, assembly, and welding procedures.
Bolts, clamps, and tack-welds parts to secure in position for welding.
May assemble parts by bolting.
Capable of constant bending, stooping, reaching, and lifting weight up to 50 pounds. Capable of recognizing team lifting opportunities.
Welder Jobs
By Yamaha Motor At , Lebanon, 65536, Mo
Skilled in TIG welding of aluminum.
Need some knowledge of how to assemble things.
Perform housekeeping on a daily basis to maintain a safe work environment.
Welding aluminum parts of various thicknesses and alloys.
Read measuring devices such as tape measures and squares.
Use some power tools, such as grinders, sanders, drills, and pop riveters.
Mig Welder Jobs
By Forest River, Inc. At , Middlebury, In

Experience in steel mig welding

Welding steel rail and tubes with a mig

Welder Jobs
By Cornerstone Building Brands At , Brookhaven, 39601, Ms From $20 an hour
Receive job duties from team lead
Follow work procedures and tool and material requirements
Other projects and responsibilities may be added at the company’s discretion
High School Graduate or General Education Degree
2 years’ experience in welding/fabricating
Select and set up welding equipment
Welder Jobs
By Deployed Resources LLC At , Jackson, 39209, Ms $18 - $24 an hour
Thorough knowledge of safety procedures and legal regulation guidelines
Substantial knowledge of GMAW & GTAW welding processes
Experience with carbon steel welding (GMAW)
3+ years’ proven welding experience, to include experience in industrial and/or commercial welding is required
Welding certification (or other trade certifications) are desired
Must pass a drug test, motor vehicle record check, and background check after accepting a conditional offer of employment.

Are you looking for a challenging and rewarding career in welding? Join our team at the Shipyard and become a Welder! We offer competitive pay, great benefits, and a supportive work environment. With your welding skills, you'll help build and repair ships of all sizes. Come join us and make a difference!

Overview:

Shipyard Welders are responsible for welding and fabricating metal components for ships and other marine vessels. They use a variety of welding techniques to join, cut, and repair metal parts. They must be able to read and interpret blueprints and technical drawings to ensure accuracy and quality. Shipyard Welders must be able to work in a fast-paced environment and be able to work with a variety of tools and equipment.

Detailed Job Description:

Shipyard Welders are responsible for welding and fabricating metal components for ships and other marine vessels. They must be able to read and interpret blueprints and technical drawings to ensure accuracy and quality. They must be able to use a variety of welding techniques to join, cut, and repair metal parts. Shipyard Welders must be able to work in a fast-paced environment and be able to work with a variety of tools and equipment. They must be able to inspect their work for accuracy and quality. They must be able to work independently and as part of a team.

What is Shipyard Welder Skills Required?

• Knowledge of welding techniques and processes
• Ability to read and interpret blueprints and technical drawings
• Ability to use a variety of tools and equipment
• Ability to work in a fast-paced environment
• Ability to inspect work for accuracy and quality
• Ability to work independently and as part of a team
• Good communication and interpersonal skills

What is Shipyard Welder Qualifications?

• High school diploma or equivalent
• Completion of a welding program or apprenticeship
• Certification in welding processes
• Valid driver’s license

What is Shipyard Welder Knowledge?

• Knowledge of welding techniques and processes
• Knowledge of safety procedures
• Knowledge of blueprints and technical drawings

What is Shipyard Welder Experience?

• Previous experience in welding and fabrication
• Previous experience in a shipyard or marine environment

What is Shipyard Welder Responsibilities?

• Weld and fabricate metal components for ships and other marine vessels
• Read and interpret blueprints and technical drawings
• Use a variety of welding techniques to join, cut, and repair metal parts
• Inspect work for accuracy and quality
• Work in a fast-paced environment
• Work independently and as part of a team
• Follow safety procedures