Register
Recruit Create CV

Pipe Fitter Jobs in Texas

Utility / Pipe Underground Crew
By Udelhoven At , Floresville, 78114 $20 - $28 an hour
What You Will Need (minimum qualifications):
Plan, direct and participate in the maintenance of water distribution and wastewater collection systems.
Use of and operation of various equipment including a truck, excavator, loader.
Perform the full range of duties in the assigned area of work.
Participate in the connection of meter services; take meter readings as appropriate.
Working with inspectors for necessary approval on work completed.
Lead Pipe Lining Technician
By Aztec Plumbing & Drains At , Naples, 34105 $35 - $65 an hour
Keep lines of communications open with each other, team members, management and
Prior experience in epoxy lining of residential and commercial drain systems.
Knowledge of safe use of equipment, materials and supplies used in plumbing and construction work.
Perform a variety of tasks in epoxy lining projects.
Assist in installing and maintaining plumbing systems.
Maintain a clean job site in order to eliminate potential hazards.
Field Engineer-Pipe Jobs
By Garney Construction At , Atlanta, Ga From $70,000 a year

GARNEY CONSTRUCTION A Field Engineer position is available in Atlanta, GA. In this position, you will act as the glue that unites the team by translating the information between the office engineers ...

Helper Pipe Fitter 1 Jobs
By Zachry Group At Sabine Pass, TX, United States
Must have 2 plus years of experience working as an industrial Pipefitter Helper
Must meet all qualifications below. (See below).
Must have experience on an industrial construction project.
Good communication skills with co-workers and supervisors.
Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements.
ZACHRY is currently seeking an experienced Industrial Helper Pipefitter 1
Mechanical Pipe Installer Jobs
By Garney Construction At , Lexington, 78947, Tx

GARNEY CONSTRUCTION A Mechanical Piping Specialist position in Lexington, TX is available at Garney Construction. To be considered for this position you must be able to read and understand blueprints ...

Pipe Layer Jobs
By Crowder Constructors Inc At , Concord, 28025, Nc
Skills, Knowledge, Qualifications & Experience:
Knowledge of tools and equipment necessary to perform discipline.
Qualified Minorities, Females, Individuals with Disabilities and Protected Veterans are encouraged to apply.
REQUIREMENTS: ALL Applicants must be:
Benefits may vary based on position and length of employment.
Able to Pass a Drug Test
Helper Pipe Fitter 1 Jobs
By Zachry Group At , Sabine Pass, 77655, Tx
Must have 2 plus years of experience working as an industrial Pipefitter Helper
Must meet all qualifications below. (See below).
Must have experience on an industrial construction project.
Good communication skills with co-workers and supervisors.
Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements.
Must be able to follow instructions.
Pipe Yard Worker Jobs
By EPIC PIPING, LLC At , Houston, Tx
Other various duties as assigned by management.
Opportunities to take on new challenges and responsibilities that will stretch your abilities and expand your horizons.
Education: High School Diploma or GED; preferred
Experience: 1+ Years of Experience in Industrial Warehouse Environment; Minimum 1 Year of Experience Operating a Pettibone Carry-Lift or Similar Equipment
Computer Skills: None specifically required
Competitive insurance and benefit options
Fitter (Sprinkler) Jobs
By MIT Lincoln Laboratory At , Lexington, Ma

Monday - Friday 7:30am - 3:30pm

Welder/Fitter Jobs
By The Haskell Company At , Temple, 76504, Tx
Specific Knowledge, Skills, License, Certifications:
Four years of experience and appropriate welding certifications for the type of welds to be performed
AWS (American Welding Society) certification
Familiarity with basic weld quality requirements
Familiarity with steel fabrication safety requirements
Environmental Factors and/or Physical Requirements:
Welder/Fitter Jobs
By Carlton Staffing Services At , Houston, 77040, Tx Up to $28 an hour
Pay: Up to $28/hour, depending on experience
We are looking for experienced, reliable, hard-working employees who can interview immediately!
Hours: Day shift, ability to work overtime and weekends if needed
Fitter Jobs
By Weir Group At , Newton, Ms
Operate hand held grinders to safely remove excess metal from inside and outside castings
Verify fit accuracy by correctly using gaging with different thickness feeler gages
Utilize hoist to manipulate castings to the proper position for fitting/gaging
Keeping track of the part Identification
Correctly fill out shift pitch board to include current pitch and reasons if pitch is missed
Keep work station in good order for the next shift/operator
Certified Contact Lens Fitter – Ophthalmology
By Kelsey-Seybold Clinic At , Houston, Tx $44,762 - $55,307 a year
Required: 1-2 years experience CTL fitting
Required: CPR certification; Certified by NCLE within 6 months of employment
Employee Reward and Recognition Program
Paid time off for vacation, sick, and holidays
Certified Contact Lens Fitter – Ophthalmology
Required: High School diploma or GED from an accredited program

Are you looking for a job that offers a chance to work with your hands and use your problem-solving skills? Become a Pipe Fitter and join a team of professionals who work together to create and maintain plumbing systems. With a Pipe Fitter job, you'll have the opportunity to work with a variety of materials, from copper and steel to PVC and polyethylene. Plus, you'll get to work in a variety of settings, from residential homes to commercial buildings. So, if you're looking for a challenging and rewarding career, become a Pipe Fitter today!

Overview:

Pipe Fitters are responsible for the installation, maintenance, and repair of piping systems in residential, commercial, and industrial settings. They must be knowledgeable in the use of tools and materials, and have the ability to read and interpret blueprints and diagrams.

Detailed Job Description:

Pipe Fitters are responsible for the installation, maintenance, and repair of piping systems in residential, commercial, and industrial settings. They must be knowledgeable in the use of tools and materials, and have the ability to read and interpret blueprints and diagrams. They must be able to measure, cut, thread, and assemble pipes and fittings, and install them in accordance with local codes and regulations. Pipe Fitters must also be able to identify and troubleshoot problems with existing piping systems, and make necessary repairs.

What is Pipe Fitter Job Skills Required?

• Knowledge of tools and materials used in pipe fitting
• Ability to read and interpret blueprints and diagrams
• Ability to measure, cut, thread, and assemble pipes and fittings
• Knowledge of local codes and regulations
• Ability to identify and troubleshoot problems with existing piping systems
• Ability to make necessary repairs

What is Pipe Fitter Job Qualifications?

• High school diploma or equivalent
• Completion of a pipe fitting apprenticeship program
• Certification from a trade school or technical college
• Previous experience in pipe fitting

What is Pipe Fitter Job Knowledge?

• Knowledge of tools and materials used in pipe fitting
• Knowledge of local codes and regulations
• Knowledge of safety procedures

What is Pipe Fitter Job Experience?

• Previous experience in pipe fitting
• Experience in reading and interpreting blueprints and diagrams
• Experience in measuring, cutting, threading, and assembling pipes and fittings

What is Pipe Fitter Job Responsibilities?

• Install, maintain, and repair piping systems in residential, commercial, and industrial settings
• Read and interpret blueprints and diagrams
• Measure, cut, thread, and assemble pipes and fittings
• Install pipes and fittings in accordance with local codes and regulations
• Identify and troubleshoot problems with existing piping systems
• Make necessary repairs