Feeder/Finishing Packer Jobs

Description
Feeder for Folder/Gluer
Pay Rate:XX 15.05
Bill Rate:XX21.32
Shift Hours: 3pm to 11pm
Full Time
GENERAL PURPOSE: Feed die cut blanks into folder gluer. Pack folding cartons into corrugated cases to fill orders.
Essential Job Functions
Performs visual inspection of cartons for printing, die-cutting and gluing defects while feeding and packing cartons.
Along with Quality department, verifies case count.
Participates in line clearance procedures after each item is completed.
Works in other areas as needed, including QA sorting and Flat Packing.
Maintains cleanliness of work area.
Performs other duties as assigned.
Qualifications
Must have the ability to read and comprehend simple instructions.
Must pass color vision test.
Must pass color hue test.
Must have the ability to perform basic arithmetic including addition and subtraction.
Must be able to maintain good attendance.
Must be able to identify quality issues.
Must be willing to work overtime as needed; significant overtime may be required during busy periods.
Must be able to perform all essential functions of the job with or without reasonable accommodation.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Employee is required to: stand, walk, talk, see and hear. In terms of a typical 8 hour workday, On the job employees must: Not at all Occasionally (?2 hours) Frequently (2-5 hours) Continuously (5-8 hours) Bend/Stoop X Reach above shoulder level X Push/Pull X Squat X Crouch X Use hands/fingers to handle/feel X Repetitive operations X In terms of a typical 8 hour workday, On the job employees must lift and/or push/pull: Not at all Occasionally (?2 hours) Frequently (2-5 hours) Continuously (5-8 hours) Up to 10 pounds X Up to 35 pounds X This position has special vision requirements: Close vision clear vision at 20 inches or less. Color vision ability to identify and distinguish colors. Depth perception three-dimensional vision; ability to judge distances and spatial relationships. Ability to adjust focus adjust the eye to bring an object into sharp focus. Eye hand coordination ability to guide the hands with the eyes. The noise level that is typical for the work environment of this position is: Loud (examples: machinery, forklifts and air compressors). Work Hazards: How much time is spent in or around the following work hazards? On the job employees must work around: Not at all Occasionally (?2 hours) Frequently (2-5 hours) Continuously (5-8 hours) Work near moving mechanical parts X .

• Able to restart machine as needed.
• Basic Palletizing/Packing knowledge of all jobs.
• Reports any and all near misses, incidents, first aid rendered, or unsafe working conditions to the Plant Manager and Safety Manager immediately without exception
• Responsible for the cleanliness of the equipment in their assigned area.
• Assists operator and operator trainee with preventative maintenance.
• Maintenance
• Performs rework duties.
• Machinery
• Production
• Housekeeping
• Administers and models safety in his/her area of responsibility
• Maintain machine basic operation and knowledge of the Leary System
• Safety
• Assists with housekeeping of machine.
• Assists operators with make ready.
• Feed cartons into machine.
• Makes sure all safety procedures are being followed
• Assists operator and operator trainee with troubleshooting problems on the machinery.
• Responsible for product safety and product quality, and reports product safety and product quality problems to Senior Management or Quality Manager.
• Verify Job Information.
• Responsible for the safety and well-being of self and employees.
• Assists operators with setting up packing stations, which includes tape machines and ink jet printers.
• Can assist in maintenance of machine when necessary.
• Ensures compliance with all applicable OSHA and plant safety standards
• Inspects for quality of printing and cutting.
• Assists operator with locating corrugated cases where applicable.
• Hold employees accountable for working within the rules and proactively identifying and removing hazards

Finishing Packer

• Can assist in maintenance of machine when necessary.
• Production
• Machinery
• Inspects for quality of printing, folding, and gluing.
• Performs rework duties.
• Responsible for product safety and product quality, and reports product safety and product quality problems to Senior Management or Quality Manager.
• Help develop safety rules, procedures, and proactive measures to ensure a safe working environment
• Housekeeping
• Hold employees accountable for working within the rules and proactively identifying and removing hazards
• Report any and all near misses, incidents, first aid rendered, or unsafe working conditions to the Plant Manager and Safety Manager immediately without exception
• Assists operator and operator trainee with preventative maintenance.
• Assists operator with locating corrugated cases where applicable.
• Safety
• Responsible for the safety and well-being of self and employees
• Responsible for the cleanliness of the equipment in their assigned area.
• Verify Job Information.
• Assists operator and operator trainee with troubleshooting problems on the machinery.
• Assists operators with setting up packing stations, which includes tape machines and ink jet printers.
• Basic Feeder/Palletizing knowledge of all jobs.
• Assists with housekeeping of machine.
• Packs cartons in corrugated cases for finished goods warehouse.
• Maintenance
• Complete Daily Quality Check sheet.

Additional Details

• Pre-Identified Candidate Contact Info : (No Value)
• Is the purpose of this Job Posting to replace/backfill a current contingent worker? : N/A Loaded Worker
• Pre-Identified Candidate Notes : (No Value)
• Have you already identified a candidate? : N/A Loaded Worker
• Pre-Identified Candidate Name : (No Value)
• Will this worker be operating a forklift or clamp truck at any point during this assignment? : N/A Loaded Worker
• Will this position require driving? : N/A Loaded Worker
• Assignment Type : Short-term/Long-term