Register
Recruit Create CV

Principal RF Hardware Engineer Jobs

Rf Electrical/Hardware Engineer
By Parsons At , Columbia, Md $110,600 - $199,100 a year
Experience with RF simulation tools such as Microwave Office, Genesys, CST, HFSS, etc would be preferred.
Applies advanced principles, theories, and concepts.
Contributes to the development of innovative principles and ideas.
Works on unusually complex problems and provides solutions that are highly creative.
Works under consultative direction toward predetermining long-range targets.
Prepares technical and progress reports on assigned projects.
Rf Test Engineer (Starlink)
By Swarm Technologies At , Redmond, Wa $120,000 - $145,000 a year
Manage cycle times and yields, work with production partners to balance quality with rate
RF experience with antennas or communication systems
1+ year experience with radio test equipment such as spectrum analyzers, vector signal analyzers, vector signal generators, and network analyzers
1+ years of programming experience in Python, C#, C++, or MATLAB
1+ years of experience working within high-volume manufacturing and test environments
Experience designing test solutions for electronics
Rf Field Engineer Jobs
By Xylem At , Dallas, 75212, Tx $87,500 - $96,000 a year
Preform post installation certification to assure compliance with manufactures specifications
Bachelor’s degree in Engineering or Telecommunications; or equivalent experience is required.
Experienced in the use of spectrum analyzers, signal generators, RF filters, watt-meters, multi-meters and other standard test equipment types.
Demonstrate knowledge of IP v4 and IPv6 networking, ability to configure modems/ routers, in addition to simple firewall policies/Access Lists.
Perform field upgrades of hardware, software, and firmware.
Interact with multi-disciplinary groups, our partners and customers.
Rf Engineer Jobs
By Cherokee Federal At , Boulder, Co $110,000 - $122,000 a year
RF Engineer Experience, Education, Skills, Abilities requested:
BS in Electrical/Electronics Engineering or Physics, specializing in RF engineering/electromagnetics + 4-6 years experience; OR
MS in EE or Physics, specializing in RF engineering/electromagnetics + 2-4 years experience; OR
PhD in EE or Physics, specializing in RF engineering/electromagnetics + 0-2 years experience
Preference will be given to candidates with experience in waveform synthesis and modeling
Preference will be given to candidates with experience performing RF measurements in a field environment
Rf Drive Team (Rf Engineer I + Driver)
By TeleWorld Solutions Inc At , New York, Ny
BS in Engineering or Computer Science or equivalent work experience
1-3 years of experience in the wireless telecommunications industry
General understanding and or working knowledge in one or more of the following platforms and/or technologies: CDMA, EVDO, LTE, VoLTE
Good analytical, interpersonal, and communication skills
Configure drive test date collection equipment according to engineer parameters
Verify the diversity and the main branch for new sites on air
Engineer I/Engineer Ii - Rf
By Ball Aerospace At , Albuquerque, 87106, Nm
Experience and skills to effectively contribute to successful producibility of designs.
Antenna requirement evaluation, initial concept trade-off and development, in-house and customer presentations, travel, and technical proposal writing and cost/schedule estimating.
Apply technical expertise including some knowledge of other related disciplines.
Full competency in core RF engineering and antenna theory and skills and potentially specialization in electrically small antennas.
Excellent communication skills. Makes presentations and may lead group discussions.
Experience with design of electrically small antennas and a broad range of RF components (couplers of various types, amplifiers, filters, mixers)
Senior Rf Design Engineer
By Peraton At , Red Bank, 07701, Nj $146,000 - $234,000 a year
Experience with mmW RF Design
Experience with RF modeling and simulation
Experience with RF circuit board layout, design, and testing
Experience integrating with digital CCAs and FPGA designs
Experience supporting system level performance testing
Hands-on experience with standard lab equipment including oscilloscopes, logic analyzers, and signal generators
Rf Engineer Jobs
By Patriot Group International At , Chantilly, Va
You will utilize your strong interpersonal and team environment skills and some project management skills.
Provide project management support with short turn-around projects; development of requirements, project plans, needs assessment, transition planning, and future-looking roadmaps.
Be a self-starter with leadership capabilities and execution of roles and responsibilities with little to no supervision.
Have working knowledge of RF theory, and experience developing RF link budgets.
Knowledge of and experience configuring RF parameters and how changing each parameter affects link performance.
Utilize working knowledge of RF/Satellite communication systems.
Senior Rf Engineer Jobs
By GoPro At , San Francisco, Ca $107,950 - $166,750 a year
Experience with board bring-up, calibration, and supporting pre-certification RF testing.
Experience with regulatory requirements and process for wireless consumer devices, such as FCC, ETSI, PTCRB, etc.
Comfortable in giving presentations to other engineering teams and management.
Design wireless solutions for portable cameras, camera accessories and other wireless products such that they meet product requirement specifications.
Support regulatory and certification activities related to wireless technologies.
5-10 years of experience in RF hardware development with extensive lab testing.
Rf Engineer Jobs
By Peraton At , Chantilly, 20151, Va $146,000 - $234,000 a year
Provide project management support with short turn-around projects; development of requirements, project plans, needs assessment, transition planning, and future looking roadmaps.
Be a self-starter with leadership capabilities and execution of roles and responsibilities with little to no supervision.
Have working knowledge of RF theory, and experience developing RF link budgets.
Have knowledge of and experience with configuration of RF parameters and how changing each parameter affects link performance.
Have demonstrated strong customer and partner relationship building skills.
Have strong decision-making skills, as well as the ability to organize and prioritize work.
Dart Rf Test Engineer
By BOEING At , Huntsville, Al
Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements.
Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status.
5 or more years' related work experience or an equivalent combination of education and experience
9 or more years' related work experience or an equivalent combination of education and experience
14 or more years' related work experience or an equivalent combination of education and experience
Salaries are based upon candidate experience and qualifications, as well as market and business considerations.
Rf Engineering Smes Jobs
By EDX Wireless At , Eugene, 97401, Or
Project management experience (a plus)
Excellent analytical skills with ability to manage multiple projects
Proficiency with G-Suite applications and Project Management tools
This is a 100% remote opportunity
At least 5-10 years of relevant experience in RF Engineering field
Previous experience with EDX Software suite
Rf Engineer Jobs
By General Atomics and Affiliated Companies At , Herndon, Va $128,130 - $229,358 a year
Write and execute verification test plans, test procedures, and test reports against product requirements.
Previous experience with satellite space systems is required.
Experience with RF components, wire harnesses, and electrical test equipment (spectrum analyzers, network analyzers, oscilloscopes, power supplies, etc.).
Knowledge of digital communication systems, spread spectrum, single and multi-carrier techniques and modulation types such as QPSK, APSK and QAM.
Understanding and experience in environmental testing such as vibration, shock, thermal, burn-in, and TVAC.
Demonstrated experience with design/analysis/testing of radio frequency (RF) and/or microwave antenna systems.
Rf Design Engineer Or Consultant
By Lewiz communications At , San Jose, 95157, Ca

BSEE or MSEE Main responsibility is to design and qualify analog/RF circuits for transmit/receive over challenging conditions. Innovate and tune your design(s) for low power consumption, small ...

Rf Engineer Jobs
By PPG Industries At , Avon, Ma
Will also have responsibilities for new RF testing chamber development.
Minimum of 5 years of experience working in RF (Radio Frequency) testing and analysis environment required.
Demonstrate working knowledge of software development including proficiency in scripting and/or programming preferably MatLab
Demonstrate working knowledge of software to design and build (Solidworks)
Benefits will be discussed with you by your recruiter during the hiring process.
Write and update technical specifications and define the architecture of RF solutions.
Rf And Millimeter Wave Engineer, Devices And Services
By Google At , Chicago, Il
Knowledge of different wireless communication systems (e.g., 5G nR, LTE, etc.), and excellent board-level and firmware debug skills.
Bachelor’s degree in Electrical Engineering with a focus in Radio Frequency or Electromagnetism, or equivalent practical experience.
4 years of experience designing RF solutions for consumer electronics.
Experience with board design, board bring-up, desense mitigation, factory processes, and manufacturing.
Experience using RF equipment (e.g., spectrum analyzers, network analyzers, and communication test boxes).
Knowledge of RF software tools (e.g., Advanced Design System (ADS) and High-frequency Structure Simulator (HFSS)).
Rf Engineer Jobs
By iDirect GOVERNMENT At , Herndon, 20171, Va
Must have strong interpersonal skills and be self-motivated.
Over 10 years of experience in RF/Analog design.
Experience as the technical lead for engineering teams.
Extensive knowledge of the following: PLL, VCO, Modulator, Demodulator, amplifiers, Op Amp, logic gates, power supplies.
Experience in SPICE design and the associated tools
Experience in methods to reduce power supply switching noise.
Customer Support Rf Engineer (Ca)
By AMETEK, Inc. At , Torrance, 90502, Ca
Hands-on experience with a variety of antenna test ranges and knowledge of mechanical positioning systems
Ability to analyze diverse requirements in RF/Microwave measurements with a good understanding of mechanical systems
Strong analytical skills to understand complex technical systems and problem solve
Significant experience with customer interaction and systems design and/or analysis
Excellent written and verbal communication skills
Experience with test equipment: spectrum analyzer, RF power meter, VNA, oscilloscope
Senior Rf Engineer Jobs
By Verizon At , Irving, Tx $90,000 - $182,000 a year
Excellent planning and time management skills.
Understanding of FCC rules and requirements and experience interacting with government agencies.
Bachelor’s degree or four or more years of work experience.
Four or more years of relevant work experience.
Experience in RF design and optimization.
Hands-on experience with propagation modeling software such as Planet EV or Atoll.
Rf Product Engineer Jobs
By Analog Devices At , Wilmington, 01887, Ma
Bachelor's degree (BSEE) with 3-5+ years' experience or master's degree (MSEE) with relevant intern or project experience.
Good written and oral communication skills.
An understanding of a typical IC development flow, from requirements and specifications through volume production.
Hands-on experience with silicon debug and evaluation.
Experience performing system evaluation and characterization using bench test equipment including oscilloscopes, signal generators, spectrum analyzers, and vector network analyzers (VNA).
Interface as the central resource with design, test, applications, quality and marketing teams to move the product(s) through the release process.

Are you an experienced RF Hardware Engineer looking for a new challenge? We are looking for a Principal RF Hardware Engineer to join our team and help us develop innovative solutions for our customers. You will have the opportunity to work on cutting-edge technologies and be part of a team that is pushing the boundaries of what is possible. If you are looking for an exciting and rewarding career, this is the job for you!

What is Principal RF Hardware Engineer Job Skills Required?

• Expertise in RF design, simulation, and testing
• Knowledge of RF system design, including antennas, amplifiers, filters, and mixers
• Ability to design, develop, and debug complex RF hardware
• Knowledge of RF circuit design and layout techniques
• Ability to troubleshoot and debug RF hardware
• Knowledge of RF test equipment and techniques
• Ability to read and interpret schematics
• Knowledge of EMC/EMI requirements and standards
• Knowledge of FCC and other regulatory requirements
• Ability to work independently and in a team environment

What is Principal RF Hardware Engineer Job Qualifications?

• Bachelor’s degree in Electrical Engineering or related field
• 5+ years of experience in RF hardware design and development
• Experience with RF system design and simulation tools
• Experience with RF test equipment and techniques
• Experience with EMC/EMI requirements and standards
• Experience with FCC and other regulatory requirements
• Excellent written and verbal communication skills

What is Principal RF Hardware Engineer Job Knowledge?

• Knowledge of RF design principles and techniques
• Knowledge of RF system design, including antennas, amplifiers, filters, and mixers
• Knowledge of RF circuit design and layout techniques
• Knowledge of RF test equipment and techniques
•