Register
Recruit Create CV

Instrumentation Technician Jobs

Instrumentation Technician Jobs
By Marathon Petroleum Company LP At , Saint Paul Park, 55071, Mn
Strong interpersonal abilities to support team philosophy and strategy
Knowledge of and ability to troubleshoot Distributed Control Systems, PLC’s, Honeywell and Rosemount transmitters
Working knowledge of Fisher control valves, 4-20 mA, DE protocol, HART protocol and electro-pneumatic control loops
Experience working with Oracle and Meridium software
Experience with ABB & Amtek CEM analyzers and Calibration
Performing Preventative Maintenance on plant instrumentation
Instrumentation And Controls - O&M Technician
By Constellation At , Wharton, Tx $48.76 - $53.69 an hour
5. Good oral and written communication skills
1,143-megawatt (MW) combined-cycle gas and steam turbine generation facility in Wharton, Texas
5. Leads equipment or system problem identification and recommends solutions.
6. Develops operating procedures for plant equipment to ensure consistent safe operation.
8. Assists in requisitioning parts and supplies.
9. Perform any other duties as assigned.
Electrical & Instrumentation Technician Jobs
By Primient At Dayton, IN, United States
Must have demonstrated mechanical/electrical knowledge to analyse and solve problems on various process instrumentation and switchgear.
Must have prior experience in instrument calibrations and documentation in ISO 9000 or FDA facility
Strong mechanical aptitude, knowledge of tools and equipment
Process Control or Electric and Instrumentation (E&I) Technician Specific Skills
Starting rate is $41.18/hr with defined skill blocks for future rate increases.
Must have demonstrated proficiency in at least five of the following areas.
Electrical & Instrumentation Technician Jobs
By Primient At Mulberry, IN, United States
Must have demonstrated mechanical/electrical knowledge to analyse and solve problems on various process instrumentation and switchgear.
Must have prior experience in instrument calibrations and documentation in ISO 9000 or FDA facility
Strong mechanical aptitude, knowledge of tools and equipment
Process Control or Electric and Instrumentation (E&I) Technician Specific Skills
Starting rate is $41.18/hr with defined skill blocks for future rate increases.
Must have demonstrated proficiency in at least five of the following areas.
Instrumentation Technician Jobs
By PTS Advance At Frederick, MD, United States
Experience working in SAP or other Computerized Maintenance Management Systems (CMMS) preferred.
May occasionally be asked to perform "on call' responsibilities.
Experience and proficiency working with Electrical Distribution systems and wiring up to 480V required.
Experience maintaining industrial automation processes utilizing Siemens 505 or S7 PLCs, Siemens AC Vector Drives, and/or Wonderware is preferred.
Work with Safety as a top priority and actively support our client's goal of establishing a Zero Incident Safety Culture.
Ensure 100% environmental compliance in all work activities and follow our client's environmental rules and regulations.
Instrumentation Technician - Junior/Intermediate Level
By Liberty Personnel Services, Inc. At Nashville, TN, United States
Associate's degree or equivalent experience
Experience with install and maintenance projects in the automation of industrial processes
Experience working in the field at customer sites
CCST and Fiber Optic certifications a plus
Water/Wastewater Industry Experience Is a Plus.
Able to read & interpret schematics, drawings as well as comprehension of electricity & circuits
Instrumentation & Controls Technician (Hgas)
By Hunt Guillot & Associates (HGA) At Shreveport, LA, United States
In-depth knowledge and hands-on experience with Distributed Control Systems (DCS).
Minimum of 5 years of experience working as an Instrumentation & Controls Technician or in a similar role.
Excellent communication skills, both verbal and written, to effectively communicate markup changes to drafters.
Perform verification and validation of information within the DCS software.
Conduct field walkdowns of P&IDs, focusing on instrumentation elements.
Identify and document discrepancies or inconsistencies in the DCS system and P&ID drawings.
Electronics & Instrumentation Technician I
By Novo Nordisk At , Clayton, 27527, Nc
Family Focused Benefits including 12 weeks paid parental & 6 weeks paid family medical leave
Follow all safety & environmental requirements in the performance of duties
Minimum one (1) year of relevant work experience
Knowledgeable in Process Areas listed above
Experience with automated records systems such as SAP/CMMS
Experience in planning/organizing work, managing execution, checking results & revising the work plan in accordance with the daily work plan
Instrumentation Technician Jobs
By TotalEnergies At , Carville, La
Maintenance / Inspection / Technology
There is no geographical relocation available for this position.
TotalEnergies Petrochemicals & Refining USA, Inc.
About us / company profile
Industrial Electrical And Instrumentation Technician
By BASF Corporation At , Vidalia, 71373, La
Combustion and burner management systems.
Have a High School Diploma or GED with 5 years of industrial electrical/instrumentation experience or similar maintenance experience.
Perform electrical and instrumentation maintenance on a variety of production equipment including:
Analog and digital instrumentation .
Process control system maintenance troubleshooting, configuration.
Instrument and control valve calibration and repairs.
Instrumentation, Controls And Electrical (Ic&E) Technician
By NAES Corporation At , Elwood, 60421, Il $38.85 - $58.56 an hour
The initial hourly rate of pay will range from $38.85 - $58.56 depending on experience and qualifications.
Manage network systems, servers, and associated equipment
Experience in working with voltages up to 6.9KV volts highly desirable
Experience with DCS, PLC, and Turbine control system troubleshooting and programming is desirable
Experience with CMMS program is desirable
Must have knowledge working multi-meters, meggers, and other electrical test equipment
Electrical Instrumentation Controls Technician
By Randstad USA At Newberry Springs, CA, United States
Minimum 5 years of experience
Calibrate and maintain mechanical, pneumatic, chemical, electrical and electronic process controls, and measurement instrumentations
Perform PLC programming and program modifications
Electrical/Instrumentation Technician Jobs
By WestRock At , Saint Paul, 55114, Mn $31.31 - $39.47 an hour
Maintains pneumatic and electronic process control instrumentation in the St. Paul Complex.
Tests, calibrates, and repairs control and instrumentation systems for plant production/process equipment.
Analyzes malfunctions of instruments and control systems and determines necessary steps to repair equipment.
Sets up equipment for tests and measures accuracy of instruments used to record heat, pressure, magnetic resistance, other characteristics, etc.
Assists the Power Plant Engineer in emergency situations. Works with supervisor and lead person to perform troubleshooting and participates in training.
Maintains a safe and clean work area.
Water Utility Instrumentation Technician
By City of Grapevine, TX At , Grapevine, Tx $27.15 - $38.00 an hour
EDUCATION, EXPERIENCE AND OTHER REQUIREMENTS
Knowledge of and understanding lockout and tag out procedures and requirements according to OSHA standards.
Ability to lead by example and sharing of knowledge/skill.
Ability to adhere to all safety requirements established for the Water Treatment Plant.
Advanced knowledge of 120v circuits and below to perform inspections in compliance with the national electrical code.
Knowledge of instrumentation and analyzers that measure process parameters.
Instrumentation Technician - Intermediate
By ONEOK At , Williston, Nd $72,000 - $108,000 a year
Supervisory Control and Data Acquisition (SCADA) system and remote terminal units and equipment
Experience reading and interpreting repair orders, mechanical drawings, procedures, charts, diagrams, dials, gauges, and equipment manuals
Knowledge of: the use and function of reciprocating or gas turbine engines, compressors, and electronic and processing equipment applicable to position
Knowledge of: instrumentation, electronics, tools and control systems
Strength Factor Rating - Physical Demands/Requirements
Strength Factor Description - Physical Demands/Requirements
Instrumentation Technician - Independence, Mo
By Unilever At , Independence, 64055, Mo $35.80 an hour
Solid electrical experience working with and troubleshooting 24VDC- 480VAC circuits
Installs, sets up and tests equipment to meet specified requirements.
High school education or GED equivalent.
Controls and Automation experience is mandatory.
Must possess strong critical & analytical thinking, troubleshooting and problem solving skills, strong analog, digital, and mechanical skills,
Experienced using voltage and current meters, current generators, hand and small power tools.
Instrumentation Technician Jobs
By Swarm Technologies At , , Tx $21 an hour
2+ years of experience as a mechanic, technician, or construction worker
3+ years of experience using power tools in a professional capacity
1+ years of experience with electronic system assembly and construction
Experience working at a rocket launch facility and supporting launch campaigns
Basic knowledge of Wheatstone bridge theory, ability to apply ohms law, and an understanding of DC electronics
Experience working in corrosive environments and mitigation techniques
Electrical And Instrumentation Technician
By Kellogg Company At , Jackson, 38301, Tn From $29.72 an hour
Maintaining Equipment and Amplifying your PLC knowledge – Constantly alternating between troubleshooting, preventative maintenance, and on the spot machine repair
Basic computer skills including Microsoft Office
Continuous Improvement – Making electrical improvements that impact results for the operating lines
Preventative Maintenance – Completing assigned preventative maintenance on your shift
Must be able to explain, PLC (Rockwell), VFD, HMI (panel views), Motor control systems including servos, Instrumentation (process controls)
Availability to work all shifts on a rotating schedule including weekends, holidays and overtime as needed
Instrumentation Scientist Jobs
By Rigaku At , Auburn Hills, 48326, Mi
The position is available at different proficiency levels. The offer depends on qualification.
Good understanding of opto-mechanical design. The knowledge related to the design of x-ray optics and instruments is a plus.
Good knowledge of traditional optical technologies.
Strong hands-on capability and experience.
Manage development projects, including working with other departments, especially Coating Department and Engineering Department.
Must be able to meet minimum qualifications to apply.
Calibration And Instrumentation Technician Ii
By GSK At , Hamilton, 59840, Mt
Trade School completion OR Formal Military Certification (PMEL) OR 3+ years of experience in Mechanical field
Revises LSOPs as assigned. Complies with LSOP, Batch Record and Departmental Documentation requirements.
Ability to manage multiple projects and tasks in order to achieve deliverables and adhere to timelines and budgets.
Perform other duties consistent with skills and training as assigned by C&M Supervisor
2+ years of Calibration Experience
We are looking for professionals with these required skills to achieve our goals:

Are you looking for a challenging and rewarding career as an Instrumentation Technician? We are looking for an experienced and motivated individual to join our team and help us maintain and repair our instrumentation systems. You will be responsible for troubleshooting, calibrating, and repairing a variety of instruments and systems. You will also be responsible for ensuring that all safety protocols are followed and that all instruments are functioning properly. If you have a passion for instrumentation and a desire to work in a fast-paced environment, then this is the job for you!

Instrumentation Technician Job Skills:

• Knowledge of electrical and electronic systems
• Knowledge of instrumentation and control systems
• Ability to read and interpret blueprints, schematics, and diagrams
• Ability to troubleshoot and diagnose problems
• Ability to use hand and power tools
• Ability to use test equipment
• Ability to use computers
• Ability to work in a team environment
• Ability to work independently
• Ability to follow safety procedures
• Ability to communicate effectively

What is Instrumentation Technician Job Qualifications?

• High school diploma or equivalent
• Associate’s degree in instrumentation technology or related field
• Certification in instrumentation technology
• Previous experience in instrumentation and control systems

What is Instrumentation Technician Job Knowledge?

• Knowledge of electrical and electronic systems
• Knowledge of instrumentation and control systems
• Knowledge of safety procedures
• Knowledge of computer systems
• Knowledge of test equipment

What is Instrumentation Technician Job Experience?

• Previous experience in instrumentation and control systems
• Previous experience in electrical and electronic systems
• Previous experience in safety procedures
• Previous experience in computer systems
• Previous experience in test equipment

What is Instrumentation Technician Job Responsibilities?

• Install