Register
Recruit Create CV

Shipyard Welder Jobs in Buena Vista, Iowa

Welder Jobs
By General Dynamics Information Technology At , Chula Vista $21.97 - $36.70 an hour
Provides guidance and work leadership to less-experienced welders.
Applies appropriate welding processes to join, surface, fabricate, or repair parts of metal or other materials that require welding.
Works from blueprints, engineering sketches, charts, or work orders.
Lays out and marks points on parts or subassemblies using rule, square, scribe or templates.
Uses measuring instruments and hand tools to positions pieces requiring welding into jigs, holding fixtures, guides, and steps.
Inspects completed work for conformance to specifications.
Welder Jobs
By General Dynamics Information Technology At , Chula Vista, Ca $21.60 - $32.40 an hour
Applies basic welding processes to join, surface, fabricate, or repair parts of metal or other materials that require welding.
Works from blueprints, engineering sketches, charts, or work orders.
May lay out and mark points on parts or subassemblies using rule, square, scribe, or templates.
Performs all work in accordance with established safety procedures.
Participates in special projects, as required.
Wabo Certified Welder Jobs
By Alliance Steel Fabricators At , Tacoma, 98446 $21 - $25 an hour

Company Description Alliance Steel is a Non-Union, Structural and Misc. Steel Fabricator. We Pride Ourselves on Quality Workmanship , Great Team Building Experiences, and Professional Leadership. ...

Welder Jobs
By Federal Signal Corporation At , Fayette, 35555
Experience: Familiarity with welding process preferred. Demonstrated ability to operate MIG welder, with or without training.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
Other: Must be able to lift and carry up to 50 lbs. Must be able to work in fast paced environment.
Welder Jobs
By Renewable Energy Systems Limited At , Afton, 79220 $19 - $30 an hour
The final agreed-upon compensation is based on individual education, qualifications, experience, and work location.
Working knowledge of all Welding Processes. Strong in TIG and MIG needed
Electrical Substation knowledge is preferred
Ideal candidate will be able to self-manage
Aluminum and Structural Steel Certification is ideal
Minimum of 2-4-year structural steel welding/fabrication is required
Welder Jobs
By WM At , Tampa, Fl From $20 an hour
C. Other Knowledge, Skills or Abilities Required
Experience: 2 years of relevant experience.
$20.00+ an hour, Depending on Experience
MIG & Stick Welding - Fabrication & Compactor Experience is a PLUS!
II. Essential Duties and Responsibilities
B. Certificates, Licenses, Registrations or Other Requirements
Welder Jobs
By GEA Group At , Janesville, 53546, Wi $50,000 - $58,000 a year
Maintains a clean and organized work environment. Follows all applicable QHSE rules and regulatory requirements.
5 year work experience as welder / sheet metal fabricator of stainless steel parts using GMAW, GTAW and SMAW welding processes.
Able to pass basic welder certification tests
Demonstrated experience in setting up and operating semi-automatic weld manipulators.
Experience working in the metric system, including use of metric measuring tools and reading / understanding of metric drawings.
Adaptable to changing work demands and desire to learn new skills.
Welder Jobs
By Taylor Power Systems, Inc At , Clinton, Ms
3 to 6 years of Mig and Tig experience.
Welds metal parts together per the weld process specification sheet.
Performs welding on a wide variety of metals and alloys, as required on WPS and setup specs.
Welds weldments where alignments, dimensional, and weld quality must conform.
Uses weld fixtures, gauges, and jigs.
Inspects parts using precision measuring equipment and documents inspection data.
Welder Jobs
By Hth Companies Inc At Fort Dodge, IA, United States

Company Description: hth companies is an industrial services provider offering mechanical insulation, scaffolding, industrial cleaning, and various other services to meet our customers' needs across ...

Welder Jobs
By Lippert At , Rialto, 92376, Ca
Comprehensive benefit offerings including medical, dental, vision, 401k with employer match, vacation, and more!
Experience in a manufacturing environment a plus
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
A unique, inclusive and supportive company culture.
Career development and mentoring and opportunities to grow.
Holiday, personal and vacation days.
Welder Trainee Jobs
By Caterpillar At , Decatur, Il Up to $27 an hour
Job Duties/Responsibilities may include, but are not limited to:
Must be able to pass multiple welder qualification tests during the Caterpillar provided training
Ability to gain welder certification upon completion of classroom and hands on weld school training
One (1) to three (3) years of GMAW welding experience
Technical school or equal educational background in mechanical or similar discipline
Experience using GMAW with 0.045” or larger wire
Welder Jobs
By Sierra Pacific Industries At , Mount Vernon, 98273, Wa $29.23 - $29.93 an hour
Fabrication shop, industrial construction experience, or welding certification is a plus
1-year verifiable stick welding experience
Apply welding techniques to achieve visually and structurally sufficient welds
Welding and fabrication support for a manufacturing facility
Fabricate and machine parts for repairs and modifications
Ensure product and process quality through self-inspection of finished products
Welder Jobs
By Martin Sprocket and Gear, Inc. At , Clarksville, 75426, Tx
Must have MIG welding experience in a manufacturing environment
Experience with Stick and Flux Core welding a plus
Experience with grinding tools and machines preferred
Simple oral communication skills; ability to read and comprehend instructions written in English and complete simple logs and reports in English
Knowledge of basic machining practices and materials is a plus, as is general mechanical knowledge
Affordable Medical, Pharmacy, and Dental
Welder Jobs
By Hyster-Yale Group At , Greenville, 27834, Nc
2. Position fit, block, and clamp parts to obtain proper alignment; adjust fixtures; grind, cut, chip; tack
4. Check work for adherence to specifications and record production information.
5. Safe behavior and safe operation of equipment, proper us of PPE.
6. Identify and process non-conforming parts and continuous process improvement.
Perform any other related duties as required are assigned.
Welder I - Tacoma
By Trident Seafoods Corporation At , Tacoma, 98421, Wa $25 an hour
Knowledgeable of proper rigging procedures.
Proficient in the use of bandsaws, grinders, needle guns, and basic mechanical skills.
Continues to grow lean knowledge and use the tools to identify and assist with continuous improvement.
A minimum of 1 year experience in SMAW and dual shield welding preferred.
A minimum of 6 months experience in a food manufacturing maintenance department.
Knowledge of food-grade welding procedures and compliance measures.
Certified Welder Jobs
By American Crystal Sugar Company At , Moorhead, Mn From $35.65 an hour
Uses the SAP maintenance management system in the accomplishment of job duties.
Uses a basic knowledge of all process equipment in performing job duties.
Must possess current ASME, Section 9 Welding Certification (6G Pipe).
Obtain forklift and manlift certification.
Day one benefits, PTO, 401K and more!
Principle accountabilities include but are not limited to:
Welder Jobs
By Service Trucks International At Sioux Center, IA, United States
Ability to read tape measures and blueprints
paid time off (PTO) match
A DAY IN THE LIFE AS A WELDER / FABRICATOR
ARE YOU READY TO JOIN OUR MANUFACTURING TEAM?
Experienced Welder Jobs
By Caterpillar At , Decatur, Il Up to $29.10 an hour
Job Duties/Responsibilities may include, but are not limited to:
3+ years of GMAW or FCAW welding experience
Must be able to pass multiple welder qualification tests during the Caterpillar provided training
Technical school or equal educational background in mechanical or similar discipline
Experience using GMAW or FCAW with 0.045” or larger wire
Experience welding ½” or greater thickness material
Carman/Welder Jobs
By Union Tank Car Company At , Muscatine, 52761, Ia From $20.72 an hour
Must have some welding basic welding experience
Demonstrate job related computational knowledge; for example, be able to read a ruler
Company-paid benefits: disability and life insurance
Welds components related to tank cars including tanks, bolsters, underframes, side sills, etc.
Performs welded repairs by utilizing air arc cutting torch and stick or wire welding equipment.
Uses hand tools and equipment to chip and grind weld, slag or spatter.
Welder Jobs
By Ferguson Fire & Fabrication Inc At , Garner, 27529, Nc $17.07 - $25.60 an hour
3+ years welding experience required
Strong interpersonal skills and ability to prioritize workload appropriately in order to balance multiple demands and meet timelines as required
Weld outlets onto steel pipe to serve the fire sprinkler industry
Perform specialty welding tasks; spool pieces, flanges, etc.
Inspects work for defects, dimensions, alignment, end preparations, and seam splits in pipe
Maintain a clean and safe welding station while conforming to Ferguson’s standards of quality and performance

Are you looking for a challenging and rewarding career in welding? Join our team at the Shipyard and become a Welder! We offer competitive pay, great benefits, and a supportive work environment. With your welding skills, you'll help build and repair ships of all sizes. Come join us and make a difference!

Overview:

Shipyard Welders are responsible for welding and fabricating metal components for ships and other marine vessels. They use a variety of welding techniques to join, cut, and repair metal parts. They must be able to read and interpret blueprints and technical drawings to ensure accuracy and quality. Shipyard Welders must be able to work in a fast-paced environment and be able to work with a variety of tools and equipment.

Detailed Job Description:

Shipyard Welders are responsible for welding and fabricating metal components for ships and other marine vessels. They must be able to read and interpret blueprints and technical drawings to ensure accuracy and quality. They must be able to use a variety of welding techniques to join, cut, and repair metal parts. Shipyard Welders must be able to work in a fast-paced environment and be able to work with a variety of tools and equipment. They must be able to inspect their work for accuracy and quality. They must be able to work independently and as part of a team.

What is Shipyard Welder Skills Required?

• Knowledge of welding techniques and processes
• Ability to read and interpret blueprints and technical drawings
• Ability to use a variety of tools and equipment
• Ability to work in a fast-paced environment
• Ability to inspect work for accuracy and quality
• Ability to work independently and as part of a team
• Good communication and interpersonal skills

What is Shipyard Welder Qualifications?

• High school diploma or equivalent
• Completion of a welding program or apprenticeship
• Certification in welding processes
• Valid driver’s license

What is Shipyard Welder Knowledge?

• Knowledge of welding techniques and processes
• Knowledge of safety procedures
• Knowledge of blueprints and technical drawings

What is Shipyard Welder Experience?

• Previous experience in welding and fabrication
• Previous experience in a shipyard or marine environment

What is Shipyard Welder Responsibilities?

• Weld and fabricate metal components for ships and other marine vessels
• Read and interpret blueprints and technical drawings
• Use a variety of welding techniques to join, cut, and repair metal parts
• Inspect work for accuracy and quality
• Work in a fast-paced environment
• Work independently and as part of a team
• Follow safety procedures