Assembler Welder Tester Jobs

Education Required (Use effective 3/27/2020 : High School or equivalent

3 Assembly Temps (Department # 2L56)

2 Assembly Temps (Department # 2L55)

Type of Position : New Order

FAA Drug Screen Required : No

Drivers License Required : No

Post-secondary education electronics technology preferred.

Interprets blueprints, engineering orders, assembly routes, test specifications, service bulletins, customer requirements, and quality directives.

Able to read and interpret blueprints and written work instructions.

Ability to calculate basic shop math.

Ability to use a computer.

At least two or more years mfg. exp to include assembly.

Electrical assembly of products with 110/240 volt and low voltage power. These positions require some knowledge of electrical circuits.

We have a variety of jobs available depending on your skills and ability:

Manufacturing experience is preferred but we can also train you for your job. All we need is:

Mechanical assembly using powered and manual hand tools.

Light assembly of smaller products, subassembly of components, picking and packing parts, etc.

Testing of finished products with the ability to identify defective components and ensure quality is met.

Skills to perform moderate-to-complex assembly operations

Assemble, rework, and reassemble product as specified on applicable documentation

Verify accuracy of instruction documents

Check work for accuracy, quality, and conformance to specifications, through verification and testing

Work directly with supervisor or lead to advise of work-related problems or product discrepancies

Record test data and results

May require specialized certification specific to division requirements (i.e. certified operator, FAA repair license, soldering certification).

Interprets blueprints, engineering orders, assembly routes, test specifications, service bulletins, customer requirements, and quality directives.

Assists in training less experienced team members.

May perform other related responsibilities.

Five or more years direct industry related experience in assembly/test in a high‐technology manufacturing environment.

Demonstrate product and process knowledge by applying it to newly learned techniques.

14. May perform other related responsibilities. Qualifications Qualifications

May require specialized certification specific to division requirements (i.e. certified operator, FAA repair license, soldering certification).

Possess extensive historical knowledge of product and process situations normally encountered.

5. Performs diagnostic teardown and rebuilding of product, including evaluation of suitability of components, according to customer specifications.

6. Produces and inspects assemblies that conform to product specifications. Assembles, tests, and/or solders to customer and/or industry standards.

7. Interprets blueprints, engineering orders, assembly routes, test specifications

Responsible for notifying supervisors when work received does not meet the specifications required by previous operators including paperwork requirements as observable.

Proficient writing skills and ability to comprehend detailed written instructions

Good mechanical aptitude and excellent problem solving skills

Certification in Hydraulic Mechanics or related field from an accredited college or vocational school

Prior work experience with hydraulic systems in an aviation or military setting

Minimum two (2) years of experience performing mechanical assembly, disassembly, and troubleshooting in a manufacturing, military, or aviation environment is required.

**Competitive medical, dental, and vision benefits, tuition reimbursement program 401(k) match

Assemble parts per prints, work instructions, and on the job training.

Use basic hand tools and air tools to assemble products.

Performs specified electrical and performance tests on subassemblies and assembled product.

Assists on paint line as needed.

Completes key performance indicators (KPIs) for performance measurement.

Use working knowledge of the products to perform diagnostic rework on units which do not meet test requirements

At least one year experience in precision assembly or hydraulic testing

Comprehensive medical, dental, and vision benefits on day one

Work from drawings, worksheets, parts lists, and other units

Work on repairs normally run with production units

Work on hydraulic stands to perform assembly functions

14. May perform other related responsibilities. Qualifications Qualifications

May require specialized certification specific to division requirements (i.e. certified operator, FAA repair license, soldering certification).

Possess extensive historical knowledge of product and process situations normally encountered.

5. Performs diagnostic teardown and rebuilding of product, including evaluation of suitability of components, according to customer specifications.

6. Produces and inspects assemblies that conform to product specifications. Assembles, tests, and/or solders to customer and/or industry standards.

7. Interprets blueprints, engineering orders, assembly routes, test specifications

Pay rate can increase if you have good experience**

Outstanding manual dexterity and diligence (manual dexterity test will be given during interview, ask Belcan Program Manager for Details)

You will get a sign in bonus at 30 days and half after 6 Months**

Competitive Medical with prescription, Dental, Vision from hire date

$50,000 Life Insurance Policy from hire date

Flexible Spending Accounts (Health Care FSA and Dependent Care FSA)

Interprets blueprints, engineering orders, assembly routes, test specifications, service bulletins, customer requirements, and quality directives.

May perform other related responsibilities.

Performs diagnostic teardown and rebuilding of product, including evaluation of suitability of components, according to customer specifications.

Produces and inspects assemblies that conform to product specifications. Assembles, tests, and/or solders to customer and/or industry standards.

Actively leads lean initiatives by identifying and providing suggestions on areas for improvement.

Interfaces with support functions to solve product problems and conduct work according to business contract.

May require specialized certification specific to division requirements (i.e. certified operator, FAA repair license, soldering certification).

Interprets blueprints, engineering orders, assembly routes, test specifications, service bulletins, customer requirements, and quality directives.

Assists in training less experienced team members.

May perform other related responsibilities.

Five or more years direct industry related experience in assembly/test in a high‐technology manufacturing environment.

Demonstrate product and process knowledge by applying it to newly learned techniques.

Prior experience with wire harness or electronics manufacturing

Employment is contingent upon successful completion and maintenance of all required certifications for this role.

Electronic Circuit Card Assembly Experience

Solder, bond, and coating certification.

Industry-related certifications such as NASA Hand Solder, J-STD, Hardware torque, Adhesive Bonding, Polymerics, Connector Mate & De-Mate, and NASA cable harness.

Prior solder fountain or wave solder experience.

Knowledge of all mechanical components on the rig and their ideal operation

Overall knowledge of product line

Plan and lay out work from blueprints, drawings, or other written specifications

Install and connect hydraulic controls, pumps, rams, and other system elements

Mount, hook-up and connect engines, gear boxes, axles and other power components and units

Maintain the cleanliness of the assembly area

Some flux core (working with .045 and 1/16 wire) welding experience

Experience in operating a portable grinder (sizes 4 ½” & 9” grinders)

Able to lift up to 60 pounds

Submit an online application • Download a print application for fax to 937-855-6554; or mail to:

Knowledge of all mechanical components on the rig and their ideal operation

Overall knowledge of product line

Knowledge of MFG Pro preferred

Plan and lay out work from blueprints, drawings, or other written specifications

Install and connect hydraulic controls, pumps, rams, and other system elements

Mount, hook-up and connect engines, gear boxes, axles and other power components and units