Interdisciplinary Jobs

Summary About the Position: This is an Interdisciplinary Engineer GS-12/13 position with US Army Engineer District, Little Rock Projects and Programs Management Division, Military Programs Branch located in Little Rock, AR. This position can be filled in one of the following series: 0801, 0810, 0830, 08

• Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
• Related curriculum
• Specified academic courses
• Written Test
• Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
• This is a developmental position which can be filled at the GS-12 level with promotion potential to the GS-13 or it can be filled at the GS-13 level. Promotion is at management's discretion. Responsibilities Provide expert project management for projects/programs of high dollar value ($100 to over $200 million in total cost), of national priority, environmental sensitivity, extraordinary urgency, or having similar requirements. Serve as the district's primary point of contact with the local sponsor/customer throughout the project's life. Present on behalf of the District before state and local governments, contractors, other agencies, and Congress. Requirements Conditions of Employment Qualifications Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for [Engineer]: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
• Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: GS-12 Specialized Experience: One year of specialized experience which includes performing 3 out of the 4 following duties: 1)Managing a multi-disciplined team; OR 2) Developing proposals and cost estimates for current or future work; OR 3) Managing technical cost and schedule requirements for assigned projects; OR 4) Developing design-build construction contract criteria. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). GS-13 Specialized Experience: One year of specialized experience which includes performing 2 out of the 3 following duties: 1) Evaluating project processes for possible areas of improvement with respect to quality, cost, and schedule; OR 2) Resolving highly difficult technical and administrative project problems using conflict resolution principles; OR 3) Managing a design build construction contract from inception to completion. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12). You will be evaluated on the basis of your level of competency in the following areas: General Engineering Project Management Technical Competence Education FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html Additional Information Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. One year trial/probationary period may be required. Direct Deposit of Pay is required. This position requires you to submit a Public Financial Disclosure Report (OGE 278) or a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. This is a Career Program (CP) 18 position. You may claim military spouse preference (MSP). If a MSP applicant is determined best qualified and selected, placement must be at the full performance level for priority consideration. Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information. If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application. Payment of Permanent Change of Station (PCS) costs is authorized, subject to the provisions of the Joint Travel Regulations. Due to COVID-19, the agency is currently in an expanded telework posture. If selected, you may be expected to temporarily telework, even if your home is located outside the local commuting area. Once employees are permitted to return to the office, you will be expected to report to the duty station listed on this announcement within a designated time frame identified by the organization. At that time, you may be eligible to request to continue to telework one or more days a pay period depending upon the terms of the agency's telework policy. Information may be requested regarding the vaccination status of selectees for the purposes of implementing workplace safety protocols. For more information, visit https://www.saferfederalworkforce.gov/faq/vaccinations/.
• Professional registration or licensure
• Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.